Knife gate valve type EXN

Knife gate valve type EXN

Orbinox

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Orbinox ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Knife gate valve type EXN ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Orbinox Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Wafer type gate valve in short overall length, sealing on one side,
for installation between flanges according to EN 1092-2 PN 10
Nominal width : DN 100
Housing : GJL 250/GG 25, epoxy coated RAL 5015
Knife : AISI 304 (1.4301) stainless steel
Piston rod : stainless steel AISI 430 (1.4016)
Mounting bracket : steel, epoxy coated
Protection against accidental contact : stainless steel AISI 304 (1.4301)
Gland follower: up to DN 300 aluminum, from DN 350 ductile iron
Gland packing : PTFE-impregnated synthetic fiber (type ST) with EPDM O-ring
Sealing ring : EPDM
Sealing clamp ring : Type A (standard), stainless steel AISI 304 (1.4301)
Actuation : aluminum double-acting pneumatic actuator
Control pressure : 5 – 7 bar
permissible differential pressure
in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar
DN 450 = 5 bar, DN 500 to DN 600 = 4 bar
DN 700 to DN 1200 = 2 bar
Accesories : - - -
Without flange seal and fastening material

Tüm Modeller (Orbinox)
Knife Gate Valve Dn200
Both sides sealing intermediate flange slide with 2 slide plates for fibrous media for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 300 Housing: stainless steel 1.4401 Housing lining: UHMW polyethylene Slide plates: stainless steel AISI 316 (1.4401) Piston Rods: Stainless Steel AISI 430 (1.4016) Mounting bracket: steel, epoxy coated Contact protection: stainless steel AISI 304 (1.4301) Stuffing goggles: Stainless steel 1.4401 Stuffing box packs: Dynapack (type DP) Seat rings: CF8M (1.4408) Housing lining: polyethylene Operation: 2 double-acting pneumatic actuators made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Equipment : - Without flange gasket and mounting material
Orbinox Gate Valve Type Dtn Dn300

Both sides sealing intermediate flange slide with 2 slide plates for fibrous media for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 300 Housing: stainless steel 1.4401 Housing lining: UHMW polyethylene Slide plates: stainless steel AISI 316 (1.4401) Piston Rods: Stainless Steel AISI 430 (1.4016) Mounting bracket: steel, epoxy coated Contact protection: stainless steel AISI 304 (1.4301) Stuffing goggles: Stainless steel 1.4401 Stuffing box packs: Dynapack (type DP) Seat rings: CF8M (1.4408) Housing lining: polyethylene Operation: 2 double-acting pneumatic actuators made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Equipment : - Without flange gasket and mounting material

Intermediate flange slide in short construction length, one-sided sealing, for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 200 Housing: stainless steel CF8M (1.4408) Slide plate: stainless steel AISI 316 (1.4401) Piston rod: stainless steel AISI 430 (1.4016) Mounting bracket: stainless steel AISI 304 (1.4301), prepared for the installation of initiators Ø 18 mm Contact protection: stainless steel AISI 304 (1.4301) Stuffing box gauges: stainless steel CF8M (1.4408) Sealing ring: EPDM Seat ring: stainless steel CF8M (1.4408) Stuffing box packing: Dynapack (DP) Operation: double-acting pneumatic actuator made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 125 = 16 bar, DN 150 to DN 250 = 10 bar, DN 300 to 400 = 6 bar, DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1000 = 2 bar
Orbinox Gate Valve Type Ekn Pn10

Intermediate flange slide in short construction length, one-sided sealing, for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 200 Housing: stainless steel CF8M (1.4408) Slide plate: stainless steel AISI 316 (1.4401) Piston rod: stainless steel AISI 430 (1.4016) Mounting bracket: stainless steel AISI 304 (1.4301), prepared for the installation of initiators Ø 18 mm Contact protection: stainless steel AISI 304 (1.4301) Stuffing box gauges: stainless steel CF8M (1.4408) Sealing ring: EPDM Seat ring: stainless steel CF8M (1.4408) Stuffing box packing: Dynapack (DP) Operation: double-acting pneumatic actuator made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 125 = 16 bar, DN 150 to DN 250 = 10 bar, DN 300 to 400 = 6 bar, DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1000 = 2 bar

ORBINOX-Knifegatevalve Type EKN uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 400 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar
Orbinox-Knifegatevalve Type Ekn Dn 400

ORBINOX-Knifegatevalve Type EKN uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 400 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar

uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 200 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accessories: - - - without Flangesealing- and Fixingmaterial
Orbinox Knifegate Valve Type Ekn

uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 200 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accessories: - - - without Flangesealing- and Fixingmaterial

Type of valve: Knife sliding valve Diameter: DN400 Body pressure: PN10 Body material: Ductile iron body Blade material: 1.4401 quality Connection style: Shall be flanged lug or wafer type Gasket: NBR Shaft: At least 1.4301 quality Packing: PTFE/EPDM
Et 07

Type of valve: Knife sliding valve Diameter: DN400 Body pressure: PN10 Body material: Ductile iron body Blade material: 1.4401 quality Connection style: Shall be flanged lug or wafer type Gasket: NBR Shaft: At least 1.4301 quality Packing: PTFE/EPDM

Vg Gjl-250/ Aisi304 / Epdm
B? Dn400 Pn10
Exn Dn 200 Pn 10
Hb Dn250 Pn16

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Gemü
Gemü
Conductix (Formerly Product Of Bischoff-Hensel)
Conductix (Formerly Product Of Bischoff-Hensel)
Automatic Valve
Automatic Valve
Evac
Evac
Red Lion
Red Lion