"Orbinox" markasına ait modeller;
uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 200 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accessories: - - - without Flangesealing- and Fixingmaterial
Orbinox Knifegate Valve Type Ekn

Orbinox
uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 200 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accessories: - - - without Flangesealing- and Fixingmaterial
Type of valve: Knife sliding valve Diameter: DN400 Body pressure: PN10 Body material: Ductile iron body Blade material: 1.4401 quality Connection style: Shall be flanged lug or wafer type Gasket: NBR Shaft: At least 1.4301 quality Packing: PTFE/EPDM
Et 07

Orbinox
Type of valve: Knife sliding valve Diameter: DN400 Body pressure: PN10 Body material: Ductile iron body Blade material: 1.4401 quality Connection style: Shall be flanged lug or wafer type Gasket: NBR Shaft: At least 1.4301 quality Packing: PTFE/EPDM
ORBINOX-Knifegatevalve Type EKN uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 400 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar
Orbinox-Knifegatevalve Type Ekn Dn 400

Orbinox
ORBINOX-Knifegatevalve Type EKN uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 400 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Piston Rod : Stainless Steel AISI 430 (1.4016) Yoke : Stainless steel AISI 304 (1.4301) Slide Cover : Stainless steel AISI 304 Gland follower : Stainless steel CF8M (1.4408) Packing : Dynapack (Type DP) Seat : EPDM K-Ring : Stainless Steel AISI 316 Actuator : Double acting pneum. Actuator, aluminium Operation pressure : 5-7 bar Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar
Intermediate flange slide in short construction length, one-sided sealing, for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 200 Housing: stainless steel CF8M (1.4408) Slide plate: stainless steel AISI 316 (1.4401) Piston rod: stainless steel AISI 430 (1.4016) Mounting bracket: stainless steel AISI 304 (1.4301), prepared for the installation of initiators Ø 18 mm Contact protection: stainless steel AISI 304 (1.4301) Stuffing box gauges: stainless steel CF8M (1.4408) Sealing ring: EPDM Seat ring: stainless steel CF8M (1.4408) Stuffing box packing: Dynapack (DP) Operation: double-acting pneumatic actuator made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 125 = 16 bar, DN 150 to DN 250 = 10 bar, DN 300 to 400 = 6 bar, DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1000 = 2 bar
Orbinox Gate Valve Type Ekn Pn10

Orbinox
Intermediate flange slide in short construction length, one-sided sealing, for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 200 Housing: stainless steel CF8M (1.4408) Slide plate: stainless steel AISI 316 (1.4401) Piston rod: stainless steel AISI 430 (1.4016) Mounting bracket: stainless steel AISI 304 (1.4301), prepared for the installation of initiators Ø 18 mm Contact protection: stainless steel AISI 304 (1.4301) Stuffing box gauges: stainless steel CF8M (1.4408) Sealing ring: EPDM Seat ring: stainless steel CF8M (1.4408) Stuffing box packing: Dynapack (DP) Operation: double-acting pneumatic actuator made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 125 = 16 bar, DN 150 to DN 250 = 10 bar, DN 300 to 400 = 6 bar, DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1000 = 2 bar
Both sides sealing intermediate flange slide with 2 slide plates for fibrous media for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 300 Housing: stainless steel 1.4401 Housing lining: UHMW polyethylene Slide plates: stainless steel AISI 316 (1.4401) Piston Rods: Stainless Steel AISI 430 (1.4016) Mounting bracket: steel, epoxy coated Contact protection: stainless steel AISI 304 (1.4301) Stuffing goggles: Stainless steel 1.4401 Stuffing box packs: Dynapack (type DP) Seat rings: CF8M (1.4408) Housing lining: polyethylene Operation: 2 double-acting pneumatic actuators made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Equipment : - Without flange gasket and mounting material
Orbinox Gate Valve Type Dtn Dn300

Orbinox
Both sides sealing intermediate flange slide with 2 slide plates for fibrous media for installation between flanges to EN 1092-2 PN 10 Nominal diameter: DN 300 Housing: stainless steel 1.4401 Housing lining: UHMW polyethylene Slide plates: stainless steel AISI 316 (1.4401) Piston Rods: Stainless Steel AISI 430 (1.4016) Mounting bracket: steel, epoxy coated Contact protection: stainless steel AISI 304 (1.4301) Stuffing goggles: Stainless steel 1.4401 Stuffing box packs: Dynapack (type DP) Seat rings: CF8M (1.4408) Housing lining: polyethylene Operation: 2 double-acting pneumatic actuators made of aluminum Control pressure: 5 - 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Equipment : - Without flange gasket and mounting material
Knife Gate Valve Dn200

Orbinox
Welded construction in square or rectangular design Flanges acc. to ORBINOX-Standard Size : W x H = 250 x 250 mm Body : Stainless Steel AISI 316 (1.4401) Corrosion Protection : --- (not required) Slide : Stainless Steel AISI 316 (1.4401) Yoke : Steel, epoxycoated Gland Follower : Stainless Steel AISI 316 (1.4401) Seat : Silicone Packing : PTFE-impreg. Synthetikfibre (Type ST) Actuator : pneumatic cylinder Approved Mediumcolumn : 1 kg/cm2 Accessories : - Without Flangesealing- and Fixingmaterial
Square Port Knife Gate Valve 250 x 250 mm

Orbinox
Welded construction in square or rectangular design Flanges acc. to ORBINOX-Standard Size : W x H = 250 x 250 mm Body : Stainless Steel AISI 316 (1.4401) Corrosion Protection : --- (not required) Slide : Stainless Steel AISI 316 (1.4401) Yoke : Steel, epoxycoated Gland Follower : Stainless Steel AISI 316 (1.4401) Seat : Silicone Packing : PTFE-impreg. Synthetikfibre (Type ST) Actuator : pneumatic cylinder Approved Mediumcolumn : 1 kg/cm2 Accessories : - Without Flangesealing- and Fixingmaterial
Wafer type gate valve in short overall length, sealing on one side, for installation between flanges according to EN 1092-2 PN 10 Nominal width : DN 80 Housing : stainless steel CF8M (1.4408) Knife : AISI 316 (1.4401) stainless steel Piston rod : stainless steel AISI 430 (1.4016) Mounting bracket : steel, epoxy-coated prepared for 2 roller limit switches (open/close) Protection against accidental contact : stainless steel AISI 304 (1.4301) Gland follower : stainless steel CF8M (1.4408) Gland packing : PTFE-impregnated synthetic fiber (Type ST) Sealing ring : EPDM Sealing clamp ring : Type A (standard), stainless steel AISI 316 (1.4401) Actuation : aluminum double-acting pneumatic actuator Control pressure : 5 – 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accesories : - Without flange seal and fastening material
Typ EX-N

Orbinox
Wafer type gate valve in short overall length, sealing on one side, for installation between flanges according to EN 1092-2 PN 10 Nominal width : DN 80 Housing : stainless steel CF8M (1.4408) Knife : AISI 316 (1.4401) stainless steel Piston rod : stainless steel AISI 430 (1.4016) Mounting bracket : steel, epoxy-coated prepared for 2 roller limit switches (open/close) Protection against accidental contact : stainless steel AISI 304 (1.4301) Gland follower : stainless steel CF8M (1.4408) Gland packing : PTFE-impregnated synthetic fiber (Type ST) Sealing ring : EPDM Sealing clamp ring : Type A (standard), stainless steel AISI 316 (1.4401) Actuation : aluminum double-acting pneumatic actuator Control pressure : 5 – 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar Accesories : - Without flange seal and fastening material
Wafer type gate valve in short overall length, sealing on one side, for installation between flanges according to EN 1092-2 PN 10 Nominal width : DN 100 Housing : GJL 250/GG 25, epoxy coated RAL 5015 Knife : AISI 304 (1.4301) stainless steel Piston rod : stainless steel AISI 430 (1.4016) Mounting bracket : steel, epoxy coated Protection against accidental contact : stainless steel AISI 304 (1.4301) Gland follower: up to DN 300 aluminum, from DN 350 ductile iron Gland packing : PTFE-impregnated synthetic fiber (type ST) with EPDM O-ring Sealing ring : EPDM Sealing clamp ring : Type A (standard), stainless steel AISI 304 (1.4301) Actuation : aluminum double-acting pneumatic actuator Control pressure : 5 – 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1200 = 2 bar Accesories : - - - Without flange seal and fastening material
Knife gate valve type EXN

Orbinox
Wafer type gate valve in short overall length, sealing on one side, for installation between flanges according to EN 1092-2 PN 10 Nominal width : DN 100 Housing : GJL 250/GG 25, epoxy coated RAL 5015 Knife : AISI 304 (1.4301) stainless steel Piston rod : stainless steel AISI 430 (1.4016) Mounting bracket : steel, epoxy coated Protection against accidental contact : stainless steel AISI 304 (1.4301) Gland follower: up to DN 300 aluminum, from DN 350 ductile iron Gland packing : PTFE-impregnated synthetic fiber (type ST) with EPDM O-ring Sealing ring : EPDM Sealing clamp ring : Type A (standard), stainless steel AISI 304 (1.4301) Actuation : aluminum double-acting pneumatic actuator Control pressure : 5 – 7 bar permissible differential pressure in flow direction: DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar DN 700 to DN 1200 = 2 bar Accesories : - - - Without flange seal and fastening material
VALVE,GATE:KNIFE,6IN,CLASS 150,CI ASTM HANDWHEEL, CAST IRON ASTM A126 Body, 316SS STEM, NITRILE SEAT
36085956

Orbinox
VALVE,GATE:KNIFE,6IN,CLASS 150,CI ASTM HANDWHEEL, CAST IRON ASTM A126 Body, 316SS STEM, NITRILE SEAT
uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 80 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Stem : Stainless Steel AISI 430 (1.4016) , rising Yoke : Steel, Epoxycoated Gland follower : Stainless steel CF8M (1.4408) Packing : Graphite (Type GR) Seat : metal Seat retainer ring : - - - Actuator : Handwheel Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar without Flangesealing- und Fixingmaterial
ORBINOX-Knifegatevalve Type EXV DN 80

Orbinox
uni-directional wafertype knife gate valve, Flanges acc. to EN 1092-2 PN 10 Diameter : DN 80 Body : Stainless steel CF8M (1.4408) Slide : Stainless steel AISI 316 (1.4401) Stem : Stainless Steel AISI 430 (1.4016) , rising Yoke : Steel, Epoxycoated Gland follower : Stainless steel CF8M (1.4408) Packing : Graphite (Type GR) Seat : metal Seat retainer ring : - - - Actuator : Handwheel Max. pressure in flowdirection : DN 50 to 250 = 10 bar, DN 300 to DN 400 = 6 bar DN 450 = 5 bar, DN 500 to DN 600 = 4 bar without Flangesealing- und Fixingmaterial
spare parts for the EX-N DN 150 with OS 100639-009
d/w acting pneumatic cylinder,NO.9(Ø125 stroke168)

Orbinox
spare parts for the EX-N DN 150 with OS 100639-009
Sealing set pneumatic cyl. (No.14-18) Guide bushing piston rod (No. 9) Piston (No. 5)
14-18 , 9 , 5

Orbinox
Sealing set pneumatic cyl. (No.14-18) Guide bushing piston rod (No. 9) Piston (No. 5)
PN25/A21-DA/1/1
H84.660800 SV500.KVXW-A5-AKT-B11-DN80-

Orbinox
PN25/A21-DA/1/1
PN25/A13-SC/1/1
H84.660774+H84.556550 SV500.KVX-A6-AKT-B11-DN50-

Orbinox
PN25/A13-SC/1/1
PISTON IS SUPPLIED WITH ITS CLAMP AND POSITIONER WILL BE. TECHNICAL DETAILS ARE AVAILABLE IN THE ATTACHED PICTURES. PICTURE r2-1, PICTURE r2-2, PICTURE r2-3, PICTURE r2-4.
EX040

Orbinox
PISTON IS SUPPLIED WITH ITS CLAMP AND POSITIONER WILL BE. TECHNICAL DETAILS ARE AVAILABLE IN THE ATTACHED PICTURES. PICTURE r2-1, PICTURE r2-2, PICTURE r2-3, PICTURE r2-4.
P: 3.5/10BAR T: -20/80°C Pist.DN: 160mm Pist. Carrera/stroke: 610mm
DIR/2006/42/CE(MACH)

Orbinox
P: 3.5/10BAR T: -20/80°C Pist.DN: 160mm Pist. Carrera/stroke: 610mm
MODELL-DN: Ø400 MM. DRUCK: 16 BAR BLADE GATE VENTIL GEEIGNET FÜR VERFÜGBARE PNEUMATISCHE STEUERUNGEN (leider gibt es keinen Artikelnr. da es eine neue Beschaffung wird)
Modell

Orbinox
MODELL-DN: Ø400 MM. DRUCK: 16 BAR BLADE GATE VENTIL GEEIGNET FÜR VERFÜGBARE PNEUMATISCHE STEUERUNGEN (leider gibt es keinen Artikelnr. da es eine neue Beschaffung wird)
KNIFE VALVE_DN200_PN10_EX_ORBINOX
SERI-EX

Orbinox
KNIFE VALVE_DN200_PN10_EX_ORBINOX
GATE VALVE HEAVY DUTY KNIFE SERIES 20 SIZE 6
20-3636r

Orbinox
GATE VALVE HEAVY DUTY KNIFE SERIES 20 SIZE 6