Odac100

Zumbach

Teslimat Seçenekleri
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Zumbach ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Odac100 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Zumbach Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
STANDARD-SYSTEM
Diameter measuring and control system
USYS 20 processor - ODAC diameter gauge head
State-of-the-art measured value processor with multitasking system, based on
expandable microprocessor technology for an ODAC measuring head.
The basic version is for diameter measurement and control
set. However, this model can also be used for wire drawing
Applications, immersion depth or profile measurement can be configured.
Main Functions/Features:
- Desktop model or as a 19" rack for mounting in
an enclosure/cabinet
- High-contrast LCD monochrome display (240x128 pixels) of the measured values
with a selectable resolution of up to 0.0001 mm and for configuration
of the system
- Lot Summary Reports (SQC)
- Graphic bar display to show either the deviation from
Target value or ovality
- 1 serial RS-232/-422/-485 interface (configurable) for the
Printout of statistics or for remote display
- 1 RS-232/-422/-485 serial port for host communication or
Connection to USYS Data Log (configurable, galvanically isolated)
- 1 Ethernet interface for host communication or connection
with USYS data log
- +/- tolerance and pre-alarms
- I/O connector plug with the following inputs/outputs:
- 3 relay outputs for tolerance and pre-alarms
- 4 digital inputs (e.g. start/stop and pause, statistics,
input for events)
- 5 digital outputs (tolerance alarms, pre-alarms)
- 1 counter input (e.g. for line speed)
- 1 analogue output +/-
With the SRD option, the connections can also have 2 digital inputs
and a static actuator (analogue input and output).
become.

ODAC 16J diameter gauge head
Compact, uniaxial diameter measuring head with semiconductor laser
and telecentric f-theta optics. Laser and optics are in one
built into and guarantee a robust housing (protection class IP 65).
high measurement accuracy, resolution and stability.
An air curtain with maintenance unit is available as an option
to keep the measuring windows free from contamination.
Measuring field: 16 mm
Smallest product diameter: 0.05 mm
Repeatability (± 3 Sigma): ± 0.0002 mm
10-6016

STANDARD-SYSTEM Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be used for wire drawing Applications, immersion depth or profile measurement can be configured. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become. ODAC 16J diameter gauge head Compact, uniaxial diameter measuring head with semiconductor laser and telecentric f-theta optics. Laser and optics are in one built into and guarantee a robust housing (protection class IP 65). high measurement accuracy, resolution and stability. An air curtain with maintenance unit is available as an option to keep the measuring windows free from contamination. Measuring field: 16 mm Smallest product diameter: 0.05 mm Repeatability (± 3 Sigma): ± 0.0002 mm

USYS 20-0100-A, standard without controller

Diameter measuring and control system
USYS 20 processor - ODAC diameter gauge head
State-of-the-art measured value processor with multitasking system, based on
expandable microprocessor technology for an ODAC measuring head.
The basic version is for diameter measurement and control
set. However, this model can also be configured for wire drawing applications, immersion depth or profile measurement.
Main Functions/Features:
- Desktop model or as a 19" rack for mounting in
an enclosure/cabinet
- High-contrast LCD monochrome display (240x128 pixels) of the measured values
with a selectable resolution of up to 0.0001 mm and for configuration
of the system
- Lot Summary Reports (SQC)
- Graphic bar display to show either the deviation from
Target value or ovality
- 1 serial RS-232/-422/-485 interface (configurable) for the
Printout of statistics or for remote display
- 1 RS-232/-422/-485 serial port for host communication or
Connection to USYS Data Log (configurable, galvanically isolated)
- 1 Ethernet interface for host communication or connection
with USYS data log
- +/- tolerance and pre-alarms
- I/O connector plug with the following inputs/outputs:
- 3 relay outputs for tolerance and pre-alarms
- 4 digital inputs (e.g. start/stop and pause, statistics,
input for events)
- 5 digital outputs (tolerance alarms, pre-alarms)
- 1 counter input (e.g. for line speed)
- 1 analogue output +/-
With the SRD option, the connections can also have 2 digital inputs
and a static actuator (analogue input and output).
become.
USY.0002.11000

USYS 20-0100-A, standard without controller Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be configured for wire drawing applications, immersion depth or profile measurement. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become.

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz