type DKZ 110 DN 350

5434

DN 125 Overall length: 44 mm - AT 0with built-in pneum. Rotary drive Type: AT 60. DR - double acting - required control pressure: 6 bar - 566a with relinquished el./pneum. Positioner Manufacturer: PMV, type: EP 5 single and double acting Input signal: 4 ... 20 mA Degree of protection: IP 66 with relinquished Supply air filter - 5μ Fabr. ITV, type. FIL, connection G 1/4 " ====== The butterfly valve offered is to be checked with regard to the design.

DKZ 110/DN 100

Butterfly valve with pnumatic actuator ,solenoıd valve ,switch box

based on 158876 / 2015

5118.APS DN 300 face to face: 78 mm AT300 fitted with pneumatic actuator, type: AT 300.DR - double acting - air supply necessary: ​​6 bar 625B mounting kit for initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee Additional for <APS> -control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95 ° C 2 pce. throttle valve for solenoid valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv ==================================== 1 pce. pressure regulator, including pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h

based on 163832 / 2017

5119.APS DN 350 face to face: 78 mm AT600 fitted with pneumatic actuator, type: AT 600.DR - double acting - air supply necessary: 6 bar 625B mounting kit for Initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee 1 Additional for <APS>-control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way-solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95°C 2 pce. throttle-valve for solenoid-valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid-valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv =================================== 1 pce. pressure regulator, incl. pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h

59APSD

sealing element of NBR white suitable for DKZ 110 APS / DN 300 suitable for food, correspond to European regulation (EC) No. 1935/2004

59APSD

sealing element of NBR white suitable for DKZ 110 APS / DN 350 suitable for food, correspond to European regulation (EC) No. 1935/2004

59D

Sealing sleeve made of Buna CB black suitable for DKZ 110 / DN 100

3671

Shaft seal set DKZ 110/103 / 110APS / 103APS suitable for DN 50 - DN 100 O-rings made of NBR

5139

Butterfly valve, type DKZ110 DN 350 Overall length 67 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Polyurethane sealing sleeve firmly glued in the housing Suitable for food, according to regulation (EG) No. 1935/2004 with free shaft end, square 22mm Connection according to DIN/ISO 5211, F10

spare parts EPDM GASKET