536-

536-

Sineax

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Sineax ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
536- ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Sineax Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

G 536 phase angle/
Power factor transmitter
With the following configuration:
*******
NLB version: Not according to NLB
01.Design 4 SINEAX in housing P13, rail mounted.
02.Measuring type 2 power factor (prop.cosPhi)
03.Application 2 3-or 4L-revolving str.U:L1-L2/I:L1
04.Input Rated Frequency 1 Rated Frequency: 50Hz
05.Input nominal voltage 1 input voltage. Un: 100V
06.Input Rated Current 1 Input Current In: 1 A
07.Measuring range 2 MB: 0.5..cap..1..ind..0.5
08.Output signal 2 output: 4...20mA
09.Auxiliary energy 1 Uh: 85..230V DC/AC
10.Setting time 1 4 periods of the input freq.
11.Test report E Test report English

Tüm Modeller (Sineax)
Sineax U 553 AC voltage Transmitter, rms value With the following configuration: ******* Execution according to NLB: No. 01.Form 4 in housing P13, rail mount. 02.Frequency input voltage 1 nominal frequency: 50/60 Hz 03.Measuring range L measuring range: 0 ... 500 V 04.Output signal 2 output: 4 ... 20 mA 05. auxiliary power 1 auxiliary clock: 85 ... 230 V DC / AC 06.Setting time 1 setting time: 0.3 s 07.Test report 0 without test report
Sineax U 553

Sineax U 553 AC voltage Transmitter, rms value With the following configuration: ******* Execution according to NLB: No. 01.Form 4 in housing P13, rail mount. 02.Frequency input voltage 1 nominal frequency: 50/60 Hz 03.Measuring range L measuring range: 0 ... 500 V 04.Output signal 2 output: 4 ... 20 mA 05. auxiliary power 1 auxiliary clock: 85 ... 230 V DC / AC 06.Setting time 1 setting time: 0.3 s 07.Test report 0 without test report

SINEAX DM5S Multi-Transmitter with Analog Output, MODBUS / RTU (optional), programmable With the following configuration: NLB version: Not according to NLB 01 Type 0 Without display, for DIN rail mounting 02.Application 1 Universal version all applications 3U / 3I 03.Nominal frequency 1 45..50 / 60..65 Hz 04.Auxiliary energy 1 rated voltage 24..230V DC, 100..230V AC 05.Bus connection 1 RS-485 (Modbus / RTU protocol) 06.Outputs 4 4 analogue outputs, bipolar ± 20mA 07.Test protocol without 08. Programming basic programming
Dm5s-

SINEAX DM5S Multi-Transmitter with Analog Output, MODBUS / RTU (optional), programmable With the following configuration: NLB version: Not according to NLB 01 Type 0 Without display, for DIN rail mounting 02.Application 1 Universal version all applications 3U / 3I 03.Nominal frequency 1 45..50 / 60..65 Hz 04.Auxiliary energy 1 rated voltage 24..230V DC, 100..230V AC 05.Bus connection 1 RS-485 (Modbus / RTU protocol) 06.Outputs 4 4 analogue outputs, bipolar ± 20mA 07.Test protocol without 08. Programming basic programming

Sineax U 543 AC voltage transmitters With the following configuration: NLB version: Not according to NLB 01.Form 4 In housing P8, rail mounting. 02.Measurement range L Measuring range: 0 ... 250 V 03. Output signal A Output: 0 ... 10 V. 04.Adjustability Measuring range 0 MB end value fixed 05. Test report 0 without test report
Sineax U 543

Sineax U 543 AC voltage transmitters With the following configuration: NLB version: Not according to NLB 01.Form 4 In housing P8, rail mounting. 02.Measurement range L Measuring range: 0 ... 250 V 03. Output signal A Output: 0 ... 10 V. 04.Adjustability Measuring range 0 MB end value fixed 05. Test report 0 without test report

Tv809
Sineax A200 Display Unit for DME4 96x96, 20-265V AC / DC Country of origin: Switzerland stat.warnumber: 85439000 Preference: no
154063

Sineax A200 Display Unit for DME4 96x96, 20-265V AC / DC Country of origin: Switzerland stat.warnumber: 85439000 Preference: no

Sineax M 563 Ind.Multi-Transmitter Programmable, 3 outputs 20 mA Power supply: 85-230 V AC / DC Country of origin: Switzerland stat.warnumber: 85437090 Preference: no
Sineax M 563

Sineax M 563 Ind.Multi-Transmitter Programmable, 3 outputs 20 mA Power supply: 85-230 V AC / DC Country of origin: Switzerland stat.warnumber: 85437090 Preference: no

Sineax V624 Temperature Transmitter programmable, 4-20mA, [EEx] HE 85-110 / 230V Country of origin: Switzerland stat.warnumber: 85437090
V624 Order Code : 141929

Sineax V624 Temperature Transmitter programmable, 4-20mA, [EEx] HE 85-110 / 230V Country of origin: Switzerland stat.warnumber: 85437090

Sineax Q 531 reactive power transmitters With the following configuration: NLB version: no NLB 01.Form 4 In housing P, rail mounting. 02.Application 2 3L three-phase current unequal bel. 03. Input nominal frequency 1 Rated frequency: 50 Hz 04. Input rated voltage 1 input voltage 100u.1.15V [V]: Rated voltage [V] 100.00 Up (primary) [V] 154,000.00 05. Input rated current 1 Input current In: 1 A Ip (primary) [A] 500.00 06.Measurement range 1 measuring range bipolar: Measuring range final value 120,000 Measuring range unit Mvar Calibration factor c 0.899000 07. Output signal, initial value 3 Live-zero output, initial value 20% final 08. output signal, end value 1 output end value 20 mA 09. auxiliary power 1 Uh: 85..230V DC / AC 10.Additional text on type plate 0 without additional text 11. Test report 0 Without test protocol
531-

Sineax Q 531 reactive power transmitters With the following configuration: NLB version: no NLB 01.Form 4 In housing P, rail mounting. 02.Application 2 3L three-phase current unequal bel. 03. Input nominal frequency 1 Rated frequency: 50 Hz 04. Input rated voltage 1 input voltage 100u.1.15V [V]: Rated voltage [V] 100.00 Up (primary) [V] 154,000.00 05. Input rated current 1 Input current In: 1 A Ip (primary) [A] 500.00 06.Measurement range 1 measuring range bipolar: Measuring range final value 120,000 Measuring range unit Mvar Calibration factor c 0.899000 07. Output signal, initial value 3 Live-zero output, initial value 20% final 08. output signal, end value 1 output end value 20 mA 09. auxiliary power 1 Uh: 85..230V DC / AC 10.Additional text on type plate 0 without additional text 11. Test report 0 Without test protocol

Sineax TV 809 Programmable Isolation amplifiers With the following configuration:   NLB version: no NLB 01.Form 3 In housing P12 / 17, screw terminals 02.Execution / Power 2 Standard, Un: 85..230V DC / AC 03. design current input 1 input current max. Final value 100 mA 04. Limit value signaling 0 Without limit value signaling 05. Test report Without test protocol 06.Configuration 1 Programmed by order 07.Input signal 9 input [V]: Input beginning 0,000 Entrance end 0.060 08. Output signal 0 Output: 4..20 mA 09.Output Transmission Behavior 0 Linear 10.Output time response 0 Standard setting time, approx. 80 ms 11. Power hum suppression 0 Ambient frequency 50Hz 12. Limit value, type and values 0 Limit signaling inactive 13. Limit value, switching delay 0 Limit signaling inactive 14. Limit value, mode of operation 0 Limit value signaling inactive
809

Sineax TV 809 Programmable Isolation amplifiers With the following configuration:   NLB version: no NLB 01.Form 3 In housing P12 / 17, screw terminals 02.Execution / Power 2 Standard, Un: 85..230V DC / AC 03. design current input 1 input current max. Final value 100 mA 04. Limit value signaling 0 Without limit value signaling 05. Test report Without test protocol 06.Configuration 1 Programmed by order 07.Input signal 9 input [V]: Input beginning 0,000 Entrance end 0.060 08. Output signal 0 Output: 4..20 mA 09.Output Transmission Behavior 0 Linear 10.Output time response 0 Standard setting time, approx. 80 ms 11. Power hum suppression 0 Ambient frequency 50Hz 12. Limit value, type and values 0 Limit signaling inactive 13. Limit value, switching delay 0 Limit signaling inactive 14. Limit value, mode of operation 0 Limit value signaling inactive

537 Phase angle difference measuring envelope With the following configuration: NLB version: Not according to NLB 01.Form 4 SINEAX in housing P13, rail mounting. 2nd input frequency 2 Rated frequency: 60 Hz 03. Input rated voltage 9 Input sp. Un [V]: Rated voltage [V] 115.00 04.Measurement range 9 Messber. [° el]: Measuring range beginning [° el] -180,00 Measuring range end [° el] 180.00 05. Output signal 2 Output: 4 ... 20mA 06.Hilfsenergie 4 Uh: from Messeing. 85..230VAC 07.Setting time 1 4 periods of input freq. 08. Test Protocol 0 without test protocol Country of origin: Switzerland stat.warnumber: 85437090
537-G

537 Phase angle difference measuring envelope With the following configuration: NLB version: Not according to NLB 01.Form 4 SINEAX in housing P13, rail mounting. 2nd input frequency 2 Rated frequency: 60 Hz 03. Input rated voltage 9 Input sp. Un [V]: Rated voltage [V] 115.00 04.Measurement range 9 Messber. [° el]: Measuring range beginning [° el] -180,00 Measuring range end [° el] 180.00 05. Output signal 2 Output: 4 ... 20mA 06.Hilfsenergie 4 Uh: from Messeing. 85..230VAC 07.Setting time 1 4 periods of input freq. 08. Test Protocol 0 without test protocol Country of origin: Switzerland stat.warnumber: 85437090

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Yokohama Pneumatic Hydraulic Hoses-Fittings
Yokohama Pneumatic Hydraulic Hoses-Fittings
Nanjing Nari – Relays
Nanjing Nari – Relays
Asco
Asco
Jetter
Jetter
Imo
Imo