E9-P123 - / By E10- P123

Sic Marking

Teslimat Seçenekleri
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Sic Marking ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
E9-P123 - / By E10- P123 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Sic Marking Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Needle marking system e10-p123-40

For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc.
The marking system is characterized above all by its robust and industrial design
according to the following specification:
Marking head
Hand tool with handle in pistol shape
X-axis with linear guide and ball-bearing slide, drive via
Rack, Y-axis swivel drive via rack
rubberized front plate for position fixation with V recess and
Quick setting for workpiece distance
Labeling area 120 x 40 mm, LED lighting
Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal
Embossing up to 62 HRC material hardness possible
max. 5 mm height adjustment, depending on the embossing force
Noise development 76 dB (measured at medium stamping force and speed on sheet steel)
7.5 m control cable to the control unit with cable bend protection
Weight 3.7 kg
Control unit
Integrated membrane keyboard, high-resolution color display (480x272 pixels)
USB interface, special USB driver is required
RS 232 and RS 422 interface
Ethernet and gateway for Profibus optional
Signal exchange via potential-free contacts, start / stop unit
Weight 5.0 kg
software
Font height adjustable from 0.5 to 25 mm
Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm
linear, circular and angular labeling
Multi-line labeling possible in an embossing file
inverted and mirror writing
Fonts OCR, OCR-A, Arial and Courier
Serial numbers in ascending and descending order, time variables, shifts
Data Matrix marking (ECC200),
Embossing of logos (PC software for logo creation available separately)
Preview and simulation of the embossing
up to 2000 embossed files programmable
Call of 63 programmed files BCD coded
Serial communication in ASCII protocol, text protocol and binary protocol
E10-P123-40

Needle marking system e10-p123-40 For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design according to the following specification: Marking head Hand tool with handle in pistol shape X-axis with linear guide and ball-bearing slide, drive via Rack, Y-axis swivel drive via rack rubberized front plate for position fixation with V recess and Quick setting for workpiece distance Labeling area 120 x 40 mm, LED lighting Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal Embossing up to 62 HRC material hardness possible max. 5 mm height adjustment, depending on the embossing force Noise development 76 dB (measured at medium stamping force and speed on sheet steel) 7.5 m control cable to the control unit with cable bend protection Weight 3.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Weight 5.0 kg software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm linear, circular and angular labeling Multi-line labeling possible in an embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier Serial numbers in ascending and descending order, time variables, shifts Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of the embossing up to 2000 embossed files programmable Call of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz