334744-0

Gear pump R95/800 FL-Z-W-DN132-R
Documentation MZ334730-9
Shaft sealing simply RWDR
Connection suction side DN132
Connection pressure side DN132
Direction of rotation (viewed on the drive shaft) Right
Weight [kg] 84
Dimension (length/width/height) [mm] 495/240/269
Design data: *
Operating data (general) www.rickmeier.de/downloads/downloads
Rickmeier data sheet R5
Operating data (specific) *
Pumped medium: lubricating oil ISO VG 32
Start Nominal Max.
Medium inlet temperature [°C] 20 40 80
Kinematic viscosity [mm²/s] 75 32 10
Inlet pressure during operation [bar] 0 0 0
Outlet pressure [bar] 10 10 10
Speed [rpm] 1450 1450 1450
Flow rate (calculated) [dm³/min] 1143 1119 1073
Power requirement (calculated) [kW] 33.7 31.9 29.7
Recommended drive power [kW] 37.1 35.1 32.7
Materials: *
Housing 5.1301 (EN-GJL-250)
Gear parts 1.7139 (16MnCrS5+FP)
Radial shaft seal FKM
O-ring NBR
Bearing bush bearing material
on steel back
Coating: *
External coating RM standard 1005-C2
Based on ISO 12944-5/C2.07-PUR Zn(PO)
Color RAL 7021 (black gray)
Color base 2K polyurethane base with zinc phosphate
Target layer thickness [µm] 80
Installation conditions: *
Destination country ---
Installation location ---
Height above sea level [m] < 1000
Ambient temperature [°C] -20...60
Explosion protection ---
Remark: ---
Test data (pump): *
Pumping medium mineral oil HLP 22
Medium inlet temperature [°C] 30
Kinematic viscosity [mm²/s] 33
Speed [1/min] 1450
Inlet pressure during operation [bar] -0.1
Outlet pressure [bar] 10
Test pressure (hydrostatic) [bar] ---
Test pressure (dynamic) [bar] ---
Flow rate (calculated) [dm³/min] 1119
Flow rate (min.) [dm³/min] 1063
Flow rate (max.) [dm³/min] 1231