Aeroshell Fluid 31 (Synthetic Hydrocarbon, MIL-PRF

Aeroshell Fluid 31 (Synthetic Hydrocarbon, MIL-PRF

Rheonik

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Rheonik ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Aeroshell Fluid 31 (Synthetic Hydrocarbon, MIL-PRF ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Rheonik Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Coriolis mass flow meters for liquids and gases

Measuring point data:
Medium: Aeroshell Fluid 31
Flow rate: 6 lpm max
Pressure: 350 kg/m³
Temperature: 135°C
Density: 850kg/m3
Viscosity: 1.7 - 3 cps

Coriolis transducer
Model RHM04S NEW DESIGN
Type code: RHM04S-E2-P2-PM0-10-G1-J5-NN-NN-SE-A
E2 Temperature**: Extended temperature range
(ET2) -50 to +210 °C
P2 operating pressure max. 540 bar at 120 °C
Measuring tubes: for material HP160.
Operating pressure max. 662 bar at 120 °C
Measuring tubes: with material EN 1.4410 /
SuperDuplex
PM0 measuring tubes: Parallel arrangement, detachable connection block off
SS316L, Pmax. 700 bar/120°C,
Temp. N1 with FKM seals
Temp. NA with FVMQ seals
(max. 1000 bar/120°C)
Temp.E2 with FFKM seals
(max. 300 bar / 210 °C)
10 Material: Measuring tube material Super Duplex
EN 1.4410, UNS S32750
(Tmin. -40°C)
G1 process connection: internal thread G ¼",
max. 540 bar at 120 °C
J5 connection housing: coated cast aluminium,
Cable entry 1x or 2x
M12, compact version
with RHE45
Only for Ex Code: NN
For temp. ranges: N1, NA,E2
(Tmax. 90°C at N1, NA)
NN option: without
NN Ex protection: none
SE design: manufacturer standard according to EN
SEP (Common Engineering Practice)
according to DGRL Art.3 Section 3.
On request, the corresponding
Manufacturer's declaration (certificate)
available at extra cost
A Cal. Accuracy: Standard Accuracy 0.2%
3 points (RHE 16 or higher,
otherwise 0.5%)

Tüm Modeller (Rheonik)
Coriolis mass flow meter for liquids and gases Measuring point data (please complete): Medium: Flow: Pressure: bars Temperature: °C Density: kg/m3 Viscosity: cP We recommend to add the missing measuring point data supplement , otherwise not for a flawless Device design can be guaranteed. Coriolis transducer Model RHM04S NEW DESIGN N1 temperature: normal temperature (NT) -20 to +120°C P1 operating pressure max. 157 bar at 120°C Measuring tubes: Mat. 1.4435 (316L) PM0 measuring tubes: Parallel arrangement, more detachable connection block off 1.4571, Pmax. 700 bar, 35 Material: measuring tube material EN 1.4435, SS316L, US S31603 (Default) G1 process connection: internal thread G ¼", max. 540bar at 120°C J5 connection housing: coated cast aluminium, Cable entry 1x or 2x M12, compact version with RHE45 Only for Ex Code: NN For temp. ranges: N1,NA,E2 (Tmax. 90°C at N1, NA) FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost N Service: no special services A Cal Accuracy: Standard Accuracy 0.2
RHM04S-N1-P1-PMO-35-G1-J5-FK-NN-SE-N-A

Coriolis mass flow meter for liquids and gases Measuring point data (please complete): Medium: Flow: Pressure: bars Temperature: °C Density: kg/m3 Viscosity: cP We recommend to add the missing measuring point data supplement , otherwise not for a flawless Device design can be guaranteed. Coriolis transducer Model RHM04S NEW DESIGN N1 temperature: normal temperature (NT) -20 to +120°C P1 operating pressure max. 157 bar at 120°C Measuring tubes: Mat. 1.4435 (316L) PM0 measuring tubes: Parallel arrangement, more detachable connection block off 1.4571, Pmax. 700 bar, 35 Material: measuring tube material EN 1.4435, SS316L, US S31603 (Default) G1 process connection: internal thread G ¼", max. 540bar at 120°C J5 connection housing: coated cast aluminium, Cable entry 1x or 2x M12, compact version with RHE45 Only for Ex Code: NN For temp. ranges: N1,NA,E2 (Tmax. 90°C at N1, NA) FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost N Service: no special services A Cal Accuracy: Standard Accuracy 0.2

Coriolis transmitter model RHE45 Compact design, mounted directly on the RHM Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S1 inputs/outputs: 1 x RS485 MODBUS RTU, 1 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin
RHE45-C1-D1-SO-S1

Coriolis transmitter model RHE45 Compact design, mounted directly on the RHM Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S1 inputs/outputs: 1 x RS485 MODBUS RTU, 1 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin

Sensor model RHM N1 temperature: normal temperature (NT) -20 to +120°C P2 operating pressure max. 300 bar at 120°C Measuring tubes: (larger wall thicknesses reduce the measuring range and increase the pressure loss) SM0 measuring tubes: Serial arrangement, removable Connection block with PTFE seals, Pmax. 230 bar, with flange connection 214bar. Measuring ranges with serial Pipe guide halved. M1 material: measuring tubes DIN 1.4571, process connection DIN 1.4571. G1 process connection: internal thread G 3/4", (only with PMO/PHO/SMO/PFT) JM connection housing: cast aluminum coated, Cable entry M25 or M20 or ½" or ¾", (2 x Pt1000) Only for Ex version. NN, 2A, A1, C0. For externally mounted RHE2x NN Option: Without option NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3, On request, the corresponding Manufacturer's declaration (certificate) available at extra cost. N Service: no special services A Cal. Accuracy: Standard Accuracy 0.2% 3 points (RHE 16 or higher, otherwise 0.5%)
RHM15L-N1-P2-SM0-M1-G1-JM-NN-NN-SE-N-A

Sensor model RHM N1 temperature: normal temperature (NT) -20 to +120°C P2 operating pressure max. 300 bar at 120°C Measuring tubes: (larger wall thicknesses reduce the measuring range and increase the pressure loss) SM0 measuring tubes: Serial arrangement, removable Connection block with PTFE seals, Pmax. 230 bar, with flange connection 214bar. Measuring ranges with serial Pipe guide halved. M1 material: measuring tubes DIN 1.4571, process connection DIN 1.4571. G1 process connection: internal thread G 3/4", (only with PMO/PHO/SMO/PFT) JM connection housing: cast aluminum coated, Cable entry M25 or M20 or ½" or ¾", (2 x Pt1000) Only for Ex version. NN, 2A, A1, C0. For externally mounted RHE2x NN Option: Without option NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3, On request, the corresponding Manufacturer's declaration (certificate) available at extra cost. N Service: no special services A Cal. Accuracy: Standard Accuracy 0.2% 3 points (RHE 16 or higher, otherwise 0.5%)

Coriolis mass flow meters for liquids and gases Measuring point data (please complete): Medium: various gases (please specify) Flow rate: 250 kg/h and 150 kg/hr Pressure: 300 bars Temperature: please specify Density: please specify Viscosity: please specify We recommend to add the missing measuring point data supplement , otherwise not for a flawless Device design can be guaranteed. Coriolis transducer Model RHM03S NEW DESIGN type code: RHM03S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A N1 temperature: normal temperature (NT) -20 to +120 °C P2 operating pressure max. 577 bar at 120 °C Measuring tubes: with material SuperDuplex. PM0 measuring tubes: Parallel arrangement, more detachable connection block off SS316L Pmax. 700 bar / 120 °C, Temp. N1 with FKM seals Temp.NA with FVMQ seals (max. 1000 bar / 120 °C) Temp. E2 with FFKM seals (max. 300 bar / 210 °C) 10 Material: Measuring tube material Super Duplex EN 1.4410, UNS S32750 (T min -40 °C) N1 process connection: internal thread ¼" NPT, max. 700 bar at 120 °C JM connection housing: cast aluminum coated, cable entry M20 x1.5, not for Ex protection: A0 For externally mounted RHE2x/4x T1 Option: Housing rotated 180° Connections are at the top FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost
RHM03S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A

Coriolis mass flow meters for liquids and gases Measuring point data (please complete): Medium: various gases (please specify) Flow rate: 250 kg/h and 150 kg/hr Pressure: 300 bars Temperature: please specify Density: please specify Viscosity: please specify We recommend to add the missing measuring point data supplement , otherwise not for a flawless Device design can be guaranteed. Coriolis transducer Model RHM03S NEW DESIGN type code: RHM03S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A N1 temperature: normal temperature (NT) -20 to +120 °C P2 operating pressure max. 577 bar at 120 °C Measuring tubes: with material SuperDuplex. PM0 measuring tubes: Parallel arrangement, more detachable connection block off SS316L Pmax. 700 bar / 120 °C, Temp. N1 with FKM seals Temp.NA with FVMQ seals (max. 1000 bar / 120 °C) Temp. E2 with FFKM seals (max. 300 bar / 210 °C) 10 Material: Measuring tube material Super Duplex EN 1.4410, UNS S32750 (T min -40 °C) N1 process connection: internal thread ¼" NPT, max. 700 bar at 120 °C JM connection housing: cast aluminum coated, cable entry M20 x1.5, not for Ex protection: A0 For externally mounted RHE2x/4x T1 Option: Housing rotated 180° Connections are at the top FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost

type code: RHM04S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A N1 temperature: normal temperature (NT) -20 to +120 °C P2 operating pressure max. 540 bar at 120 °C Measuring tubes: for material HP160. Operating pressure max. 662 bar at 120 °C Measuring tubes: with material EN 1.4410 / SuperDuplex PM0 measuring tubes: Parallel arrangement, more detachable connection block off SS316L, Pmax. 700 bar/120°C, Temp. N1 with FKM seals Temp. NA with FVMQ seals (max. 1000 bar/120°C) Temp.E2 with FFKM seals (max. 300 bar / 210 °C) 10 Material: Measuring tube material Super Duplex EN 1.4410, UNS S32750 (Tmin. -40°C) N1 process connection: internal thread ¼" NPT, max. 700 bar at 120 °C JM connection housing: cast aluminum coated, Cable entry M20x1.5 not for Ex protection: A0 For externally mounted RHE2x/4x T1 Option: Housing rotated 180° Connections are at the top FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost A Cal. Accuracy: Standard Accuracy 0.2% 3 points (RHE 16 or higher, otherwise 0.5%)
Model RHM04S NEW DESIGN

type code: RHM04S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A N1 temperature: normal temperature (NT) -20 to +120 °C P2 operating pressure max. 540 bar at 120 °C Measuring tubes: for material HP160. Operating pressure max. 662 bar at 120 °C Measuring tubes: with material EN 1.4410 / SuperDuplex PM0 measuring tubes: Parallel arrangement, more detachable connection block off SS316L, Pmax. 700 bar/120°C, Temp. N1 with FKM seals Temp. NA with FVMQ seals (max. 1000 bar/120°C) Temp.E2 with FFKM seals (max. 300 bar / 210 °C) 10 Material: Measuring tube material Super Duplex EN 1.4410, UNS S32750 (Tmin. -40°C) N1 process connection: internal thread ¼" NPT, max. 700 bar at 120 °C JM connection housing: cast aluminum coated, Cable entry M20x1.5 not for Ex protection: A0 For externally mounted RHE2x/4x T1 Option: Housing rotated 180° Connections are at the top FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost A Cal. Accuracy: Standard Accuracy 0.2% 3 points (RHE 16 or higher, otherwise 0.5%)

Housing: Die-cast aluminum with epoxy coating Dimensions: ~170 x 272 x 93mm (HxWxD). Mounting: wall mounting housing Operation: via 3-way membrane button the front panel Connections: via screw terminals Degree of protection: IP65 or IP67 (option) Operating temperature: -20°C to +60°C (-40 - +60°C Option), Analog outputs: active or passive, up to 2, they he coding, (NAMUR NE-43) Pulse frequency output: max. 10 kHz (IEC60946) Digital outputs: up to 2, configurable status outputs (IEC60946) see coding Digital inputs: up to 2 control inputs, (IEC60946), see coding annotation Option display: currently only monochrome, without backlight available E1 electronic type: standard, IP65 / NEMA 4, (-20°C - 60°C), 2xM16 cable entries and 2xM25 blanking plugs A1 voltage: 100 to 240 VAC (+/- 10%, 48 to 62 Hz), 5 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S2 inputs/outputs: 2 analog outputs 4-20 mA, 2 digital outputs (pulse, Frequency) 2 digital/status outputs 1 RS485 MODBUS, NN Ex-Protection: None
RHE28-E1-A1-S0-S2-NN

Housing: Die-cast aluminum with epoxy coating Dimensions: ~170 x 272 x 93mm (HxWxD). Mounting: wall mounting housing Operation: via 3-way membrane button the front panel Connections: via screw terminals Degree of protection: IP65 or IP67 (option) Operating temperature: -20°C to +60°C (-40 - +60°C Option), Analog outputs: active or passive, up to 2, they he coding, (NAMUR NE-43) Pulse frequency output: max. 10 kHz (IEC60946) Digital outputs: up to 2, configurable status outputs (IEC60946) see coding Digital inputs: up to 2 control inputs, (IEC60946), see coding annotation Option display: currently only monochrome, without backlight available E1 electronic type: standard, IP65 / NEMA 4, (-20°C - 60°C), 2xM16 cable entries and 2xM25 blanking plugs A1 voltage: 100 to 240 VAC (+/- 10%, 48 to 62 Hz), 5 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S2 inputs/outputs: 2 analog outputs 4-20 mA, 2 digital outputs (pulse, Frequency) 2 digital/status outputs 1 RS485 MODBUS, NN Ex-Protection: None

+/-0.001 kg/l (only with RHE and density software)
Density calibration: standard calibration accuracy

+/-0.001 kg/l (only with RHE and density software)

Mounting bracket for sensor types RHM015/03/04 for optimal Floor mounting of the sensor for measuring liquids. (for the most accurate measurement of small quantities)
Accesories:

Mounting bracket for sensor types RHM015/03/04 for optimal Floor mounting of the sensor for measuring liquids. (for the most accurate measurement of small quantities)

Compact design, mounted directly on the RHM Type code: RHE45-C1-D1-SO-S2 Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S2 inputs/outputs: 1 x RS485 MODBUS RTU, 2 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin
Coriolis Transmitter Modell RHE45

Compact design, mounted directly on the RHM Type code: RHE45-C1-D1-SO-S2 Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S2 inputs/outputs: 1 x RS485 MODBUS RTU, 2 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin

compact design with Display mounted on RHM, with M12, connector and cable - requires option J5
Electronictype

compact design with Display mounted on RHM, with M12, connector and cable - requires option J5

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Huco
Huco
Bussmann Eaton
Bussmann Eaton
Gruner
Gruner
Mc Monitoring
Mc Monitoring
T.A.C. By Schneider Electric
T.A.C. By Schneider Electric