Snl012-211519-00

Reitz

Teslimat Seçenekleri
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Reitz ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Snl012-211519-00 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Reitz Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Centrifugal fan without motor, impeller mounted on motor shaft,
Engine arranged on console stand. Technical specifications
according to the data sheet and current dimension sheet (if necessary, please
request). Direction of rotation: GR360.
+
1.04 DMB152-03-023-31 1 pc.
Low-voltage three-phase squirrel-cage motor, 2920
1/min, 3 kW, 400VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors,
Made by Lammers
1.06 MAU000-000100-00 1 pc.
engine mounting costs
1.08 IOG301-006000-03 1 pc.
Inspection opening, material: 1.0038, size: 60x150 mm.
Arrangement at 45°.
1.10 KAG100-100000-05 1 pc.
Condensate drain connection 1" plug
1.12 OFQ201-100000-00 1 pc.
Prime coat RAL 7040 Derogrund Hydro XT, 40 μm.
Impeller max. layer thickness of 40μm
Housing surfaces: inside (40μm) & outside (40μm)
Console surfaces: outside (40μm)
Impeller surfaces: 40μm
1.14 OFQ203-000000-01 1 pc.
Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you
If you would like a different RAL colour, please let us know
when ordering.
Housing surfaces: outside (40μm)
Console surfaces: outside (40μm)
Motor surfaces 40μm
1.16 SPZ423-050045-06 4 pcs.
Anti-vibration buffer with mounting plate (on the fan), Shore
A55, D=50, overall height=54mm. Material: 1.0226
1.18 KPK203-000014-02 1 pc.
Compensator, round with backing flange (steel parts).
polyester, installation length 150 mm, DN 140,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24154 R2
1.20 LEK003-000014-06 1 pc.
Guide plate DN 140 made of material 1.0226, bores according to DIN
24154 R2.
1.22 KPK302-010012-02 1 pc.
Compensator, angular with backing flange (steel parts).
polyester, installation length 150 mm, AN 100 x BN 125,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24193 R3
1.24 LEK002-010012-06 1 pc.
Guide plate AN/BN 100 / 125 made of material 1.0226, bores
according to DIN 24193 R3.
MXE063-000830-00

Centrifugal fan without motor, impeller mounted on motor shaft, Engine arranged on console stand. Technical specifications according to the data sheet and current dimension sheet (if necessary, please request). Direction of rotation: GR360. + 1.04 DMB152-03-023-31 1 pc. Low-voltage three-phase squirrel-cage motor, 2920 1/min, 3 kW, 400VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors, Made by Lammers 1.06 MAU000-000100-00 1 pc. engine mounting costs 1.08 IOG301-006000-03 1 pc. Inspection opening, material: 1.0038, size: 60x150 mm. Arrangement at 45°. 1.10 KAG100-100000-05 1 pc. Condensate drain connection 1" plug 1.12 OFQ201-100000-00 1 pc. Prime coat RAL 7040 Derogrund Hydro XT, 40 μm. Impeller max. layer thickness of 40μm Housing surfaces: inside (40μm) & outside (40μm) Console surfaces: outside (40μm) Impeller surfaces: 40μm 1.14 OFQ203-000000-01 1 pc. Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you If you would like a different RAL colour, please let us know when ordering. Housing surfaces: outside (40μm) Console surfaces: outside (40μm) Motor surfaces 40μm 1.16 SPZ423-050045-06 4 pcs. Anti-vibration buffer with mounting plate (on the fan), Shore A55, D=50, overall height=54mm. Material: 1.0226 1.18 KPK203-000014-02 1 pc. Compensator, round with backing flange (steel parts). polyester, installation length 150 mm, DN 140, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24154 R2 1.20 LEK003-000014-06 1 pc. Guide plate DN 140 made of material 1.0226, bores according to DIN 24154 R2. 1.22 KPK302-010012-02 1 pc. Compensator, angular with backing flange (steel parts). polyester, installation length 150 mm, AN 100 x BN 125, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24193 R3 1.24 LEK002-010012-06 1 pc. Guide plate AN/BN 100 / 125 made of material 1.0226, bores according to DIN 24193 R3.

Centrifugal fan without motor, impeller mounted on motor shaft,
Engine arranged on console stand. Technical specifications
according to the data sheet and current dimension sheet (if necessary, please
request). Direction of rotation: GR360.
+
2.04 DMB152-04-023-31 1 pc.
Low-voltage three-phase squirrel-cage motor, 2950
1/min, 4 kW, 400VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors,
Made by Lammers.
2.06 MAU000-000112-00 1 piece
engine mounting costs
2.08 IOG301-006000-03 1 pc.
Inspection opening, material: 1.0038, size: 60x150 mm.
Arrangement at 45°.
2.10 KAG100-100000-05 1 piece 
Condensate drain connection 1" plug
2.12 OFQ201-100000-00 1 pc.
Prime coat RAL 7040 Derogrund Hydro XT, 40 μm.
Impeller max. layer thickness of 40μm
Housing surfaces: inside (40μm) & outside (40μm)
Console surfaces: outside (40μm)
Impeller surfaces: 40μm
2.14 OFQ203-000000-01 1 pc.
Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you
If you would like a different RAL colour, please let us know
when ordering.
Housing surfaces: outside (40μm)
Console surfaces: outside (40μm)
Motor surfaces 40μm
2.16 SPZ423-050045-06 4 pcs.
Anti-vibration buffer with mounting plate (on the fan), Shore
A55, D=50, overall height=54mm. Material: 1.0226
2.18 KPK203-000016-02 1 piece 
Compensator, round with backing flange (steel parts).
polyester, installation length 150 mm, DN 160,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24154 R2
2.20 LEK003-000016-06 1 pc. 
Guide plate DN 160 made of material 1.0226, bores according to DIN
24154 R2.
2.22 KPK302-010012-02 1 piece 
Compensator, angular with backing flange (steel parts).
polyester, installation length 150 mm, AN 100 x BN 125,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24193 R3
2.24 LEK002-010012-06 1 pc.
Guide plate AN/BN 100 / 125 made of material 1.0226, bores
according to DIN 24193 R3.
MXE063-001230-00

Centrifugal fan without motor, impeller mounted on motor shaft, Engine arranged on console stand. Technical specifications according to the data sheet and current dimension sheet (if necessary, please request). Direction of rotation: GR360. + 2.04 DMB152-04-023-31 1 pc. Low-voltage three-phase squirrel-cage motor, 2950 1/min, 4 kW, 400VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors, Made by Lammers. 2.06 MAU000-000112-00 1 piece engine mounting costs 2.08 IOG301-006000-03 1 pc. Inspection opening, material: 1.0038, size: 60x150 mm. Arrangement at 45°. 2.10 KAG100-100000-05 1 piece Condensate drain connection 1" plug 2.12 OFQ201-100000-00 1 pc. Prime coat RAL 7040 Derogrund Hydro XT, 40 μm. Impeller max. layer thickness of 40μm Housing surfaces: inside (40μm) & outside (40μm) Console surfaces: outside (40μm) Impeller surfaces: 40μm 2.14 OFQ203-000000-01 1 pc. Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you If you would like a different RAL colour, please let us know when ordering. Housing surfaces: outside (40μm) Console surfaces: outside (40μm) Motor surfaces 40μm 2.16 SPZ423-050045-06 4 pcs. Anti-vibration buffer with mounting plate (on the fan), Shore A55, D=50, overall height=54mm. Material: 1.0226 2.18 KPK203-000016-02 1 piece Compensator, round with backing flange (steel parts). polyester, installation length 150 mm, DN 160, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24154 R2 2.20 LEK003-000016-06 1 pc. Guide plate DN 160 made of material 1.0226, bores according to DIN 24154 R2. 2.22 KPK302-010012-02 1 piece Compensator, angular with backing flange (steel parts). polyester, installation length 150 mm, AN 100 x BN 125, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24193 R3 2.24 LEK002-010012-06 1 pc. Guide plate AN/BN 100 / 125 made of material 1.0226, bores according to DIN 24193 R3.

Centrifugal fan without motor, impeller mounted on motor shaft,
Engine arranged on console stand. Technical specifications
according to the data sheet and current dimension sheet (if necessary, please
request). Direction of rotation: GR360.
+
3.04 DMB150-000000-00 1 pc.
Low-voltage three-phase squirrel-cage motor, 2950
1/min, 5.5 kW, 440VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors,
Made by Lammers.
3.06 MAU000-000132-00 1 pc.
engine mounting costs
3.08 IOG301-006000-03 1 pc.
Inspection opening, material: 1.0038, size: 60x150 mm.
Arrangement at 45°.
3.10 KAG100-100000-05 1 pc.
Condensate drain connection 1" plug
3.12 OFQ201-100000-00 1 pc.
Prime coat RAL 7040 Derogrund Hydro XT, 40 μm.
Impeller max. layer thickness of 40μm
Housing surfaces: inside (40μm) & outside (40μm)
Console surfaces: outside (40μm)
Impeller surfaces: 40μm
3.14 OFQ203-000000-01 1 pc.
Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you
If you would like a different RAL colour, please let us know
when ordering.
Housing surfaces: outside (40μm)
Console surfaces: outside (40μm)
Motor surfaces 40μm
3.16 SPZ423-050045-06 4 pcs.
Anti-vibration buffer with mounting plate (on the fan), Shore
A55, D=50, overall height=54mm. Material: 1.0226
3.18 KPK203-000018-02 1 pc.
Compensator, round with backing flange (steel parts).
polyester, installation length 150 mm, DN 180,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24154 R2
3.20 LEK003-000018-06 1 pc.
Guide plate DN 180 made of material 1.0226, bores according to DIN
24154 R2.
3.22 KPK302-011012-02 1 pc.
Compensator, angular with backing flange (steel parts).
polyester, installation length 150 mm, AN 112 x BN 125,
temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500
daPa.
Perforation according to: DIN 24193 R3
3.24 LEK002-011012-06 1 pc.
Guide plate AN/BN 112 / 125 made of material 1.0226, bores
according to DIN 24193 R3.
MXE063-002030-00

Centrifugal fan without motor, impeller mounted on motor shaft, Engine arranged on console stand. Technical specifications according to the data sheet and current dimension sheet (if necessary, please request). Direction of rotation: GR360. + 3.04 DMB150-000000-00 1 pc. Low-voltage three-phase squirrel-cage motor, 2950 1/min, 5.5 kW, 440VD, 50 Hz, IMB3, IE3, IP55, 3 PTC thermistors, Made by Lammers. 3.06 MAU000-000132-00 1 pc. engine mounting costs 3.08 IOG301-006000-03 1 pc. Inspection opening, material: 1.0038, size: 60x150 mm. Arrangement at 45°. 3.10 KAG100-100000-05 1 pc. Condensate drain connection 1" plug 3.12 OFQ201-100000-00 1 pc. Prime coat RAL 7040 Derogrund Hydro XT, 40 μm. Impeller max. layer thickness of 40μm Housing surfaces: inside (40μm) & outside (40μm) Console surfaces: outside (40μm) Impeller surfaces: 40μm 3.14 OFQ203-000000-01 1 pc. Top coat RAL 5005 2K Derocryl 70 ST, 40 μm. Should you If you would like a different RAL colour, please let us know when ordering. Housing surfaces: outside (40μm) Console surfaces: outside (40μm) Motor surfaces 40μm 3.16 SPZ423-050045-06 4 pcs. Anti-vibration buffer with mounting plate (on the fan), Shore A55, D=50, overall height=54mm. Material: 1.0226 3.18 KPK203-000018-02 1 pc. Compensator, round with backing flange (steel parts). polyester, installation length 150 mm, DN 180, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24154 R2 3.20 LEK003-000018-06 1 pc. Guide plate DN 180 made of material 1.0226, bores according to DIN 24154 R2. 3.22 KPK302-011012-02 1 pc. Compensator, angular with backing flange (steel parts). polyester, installation length 150 mm, AN 112 x BN 125, temperature-resistant up to 90°C, pressure-resistant up to max. +/- 2500 daPa. Perforation according to: DIN 24193 R3 3.24 LEK002-011012-06 1 pc. Guide plate AN/BN 112 / 125 made of material 1.0226, bores according to DIN 24193 R3.

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz