T6N4-23744 (166-746-7)

T6N4-23744 (166-746-7)

Raco

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Raco ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
T6N4-23744 (166-746-7) ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Raco Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

RACO COMPACT T6N4
with trapezoidal screw drive
0 C = motor voltage......3x400 V, 50 Hz, P = 0.17 kW
1 A = engine speed.......................3000 rpm
2 Q = adjustment speed.................20 mm/sec
3 T6N4= type/adjusting force........................3 kN
4 F = adjustment range.......................200 mm
5 E = linear feed/revolution.................4 mm
6 J = eye attachment
7 A = motor IP 54, ISO F + thermal contact
8 J = 2 proximity switches outside (10-30V DC opener)
9 I = -
10 D = 1st joint head on the thrust tube
(a3 dimension increases by 40 mm)
2. Motor with holding brake type "L" (with voltage
venting), 230V AC, to be wired separately
3. All connection cables 1.5 m long,
open cable ends
(1 x motor cable 5 x 0.75 mm² marking
U,V,W,N,PE)
(1 x brake cable including thermal contact
4 x 0.50 mm² marking 31,32,35,36)
Lacquering: none, bare aluminum
Main dimension according to drawing: 166-707-6 and 3D model

Tüm Modeller (Raco)
actuator 4.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELEKTRISCH ON / OFF SITE GESTEUERT

actuator 4.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

actuator 8.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELEKTRISCH ON / OFF SITE GESTEUERT

actuator 8.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

actuator 1.500 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELECTRIC PROPORTIONAL- ON SITE CONTROLLED

actuator 1.500 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

actuator 2.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELECTRIC PROPORTIONAL- ON SITE CONTROLLED

actuator 2.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

actuator 10.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELECTRIC PROPORTIONAL

actuator 10.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

actuator 10.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.
ELECTRIC ON-OFF

actuator 10.000 Nm Supply voltage 380-400 VAC For control type and control unit, taking into account the attached drawing; 4…20mA reference information will be sent from PLC 4…20Ma position information will be sent to PLC PLC will receive on-off, torque error on opening, torque error on closing, general error, local and remote information.

Liste am anhang
166-746-7 RACO COMPACT T6N4 with trapezoidal screw drive 0 C = Motor voltage.....3x400 V, 50 Hz, P = 0.17 kW 1 A = Motor speed...........................3000 min-1 2 Q = Adjustment speed.................20 mm/sec 3 T6N4= Type/adjustment force........................3 kN 4 F = Adjustment path............................200 mm 5 E = Linear feed/revolution..................4 mm 6 J = Eye fastening 7 A = Motor IP 54, ISO F + thermal contact 8 J = 2 external proximity switches (10-30V DC opener) 9 I = - 10 D = 1. Joint head on the push tube (a3 dimension extends by 40 mm) 2. Motor with holding brake type "L" (released with voltage), 230V AC, to be wired separately 3. All connection cables 1.5 m long, open cable ends (1 x motor cable 5 x 0.75 mm² Marking U,V,W,N,PE) (1 x brake cable including thermal contact 4 x 0.50 mm² marking 31,32,35,36) Painting: none, bare aluminum Main dimensions according to drawing 166-707-6 and 3D model
Replacement for: T6N4-23745 (166-746-7)

166-746-7 RACO COMPACT T6N4 with trapezoidal screw drive 0 C = Motor voltage.....3x400 V, 50 Hz, P = 0.17 kW 1 A = Motor speed...........................3000 min-1 2 Q = Adjustment speed.................20 mm/sec 3 T6N4= Type/adjustment force........................3 kN 4 F = Adjustment path............................200 mm 5 E = Linear feed/revolution..................4 mm 6 J = Eye fastening 7 A = Motor IP 54, ISO F + thermal contact 8 J = 2 external proximity switches (10-30V DC opener) 9 I = - 10 D = 1. Joint head on the push tube (a3 dimension extends by 40 mm) 2. Motor with holding brake type "L" (released with voltage), 230V AC, to be wired separately 3. All connection cables 1.5 m long, open cable ends (1 x motor cable 5 x 0.75 mm² Marking U,V,W,N,PE) (1 x brake cable including thermal contact 4 x 0.50 mm² marking 31,32,35,36) Painting: none, bare aluminum Main dimensions according to drawing 166-707-6 and 3D model

518
3805rac

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Sic Marking
Sic Marking
Ckd
Ckd
Deutsche Tecalamit
Deutsche Tecalamit
Yoke
Yoke
Hayward Pool
Hayward Pool