Ifs 110im-5/1/1t
Ifs 110im-5/1/1t

Ifs 110im-5/1/1t

Kromschröder

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Kromschröder ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Ifs 110im-5/1/1t ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Kromschröder Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Automatic burner control
New construction stage. Function and terminal
assignment remain the same.
*** Only for replacement ***
Ignites and controls gas burners, for intermittent operation, with
ionization or UV control, single-electrode operation possible,
multi-flame control possible, EC type-tested and certified
For grounded mains
Fault lock-out in the event of flame failure
Safety time on start-up: 5 s
Safety time during operation for V2: 1 s
Safety time during operation for V1: 1 s
Mains voltage: 220/240 V AC, 50/60 Hz
Stat. Warennummer 90268020
Ursprungsland: DE

Tüm Modeller (Kromschröder)
UVS 10D0G1 UV-sensor For monitoring gas burners in intermittent operation, EC type-tested and certified in conjunction with Elster Kromschröder automatic burner control units Series 10 Quartz glass heat guard Rp 1/2 internal thread M20 cable gland
Uvs 10d0g1

UVS 10D0G1 UV-sensor For monitoring gas burners in intermittent operation, EC type-tested and certified in conjunction with Elster Kromschröder automatic burner control units Series 10 Quartz glass heat guard Rp 1/2 internal thread M20 cable gland

actuator To deliver rotary movements (0-90 °), for Operation of gas and Air dampers, position feedback via the outside read Position indicator, protection class IP 65 Series 20, with floating limit switches Running time 30 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 3 Nm Constant control Stat. Product number 85011010 Country of origin: DE
Ic 20-30w3e

actuator To deliver rotary movements (0-90 °), for Operation of gas and Air dampers, position feedback via the outside read Position indicator, protection class IP 65 Series 20, with floating limit switches Running time 30 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 3 Nm Constant control Stat. Product number 85011010 Country of origin: DE

gas burner control replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series Ionization or UV monitoring Immediate lockout or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
IFD 258-5/1W

gas burner control replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series Ionization or UV monitoring Immediate lockout or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz

Gas burner control *** only for replacement *** Ignits and monitors gas burners, for intermittent operation, Ionisation or UV monitoring, EC type tested and certified Lockout after flame failure Safety time start-up: 5 s Safety time Operation for V2: 1 s Safety time operation for V1: 1 s Mains voltage 220/240 V ~, 50/60 Hz, for grounded nets IFS 135B-5/1 / 1T Automatic burner control unit *** Only for replacement *** Ignites and controls gas burners, for intermittent operation, with Ionization or UV control, EC type-tested and certified Fault lock-out in the event of flame failure Safety time on start-up: 5 s Safety time during operation for V2: 1 s Safety time during operation for V1: 1 s Mains voltage: 220/240 V AC, 50/60 Hz, for grounded mains Stat. Lot number 90268020 Country of origin: DE Technical documentation can be found at: http://docuthek.kromschroeder.com/doclib/main.php?language=1&folderid=206030
Ifs 135b-5/1/1t

Gas burner control *** only for replacement *** Ignits and monitors gas burners, for intermittent operation, Ionisation or UV monitoring, EC type tested and certified Lockout after flame failure Safety time start-up: 5 s Safety time Operation for V2: 1 s Safety time operation for V1: 1 s Mains voltage 220/240 V ~, 50/60 Hz, for grounded nets IFS 135B-5/1 / 1T Automatic burner control unit *** Only for replacement *** Ignites and controls gas burners, for intermittent operation, with Ionization or UV control, EC type-tested and certified Fault lock-out in the event of flame failure Safety time on start-up: 5 s Safety time during operation for V2: 1 s Safety time during operation for V1: 1 s Mains voltage: 220/240 V AC, 50/60 Hz, for grounded mains Stat. Lot number 90268020 Country of origin: DE Technical documentation can be found at: http://docuthek.kromschroeder.com/doclib/main.php?language=1&folderid=206030

Pressure switch for air For monitoring air and flue gas pressures, for positive pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as ''special-design pressureswitch'' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Stat. Warennummer 90262080 Ursprungsland: DE
Dl 3a-3

Pressure switch for air For monitoring air and flue gas pressures, for positive pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as ''special-design pressureswitch'' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Stat. Warennummer 90262080 Ursprungsland: DE

Pressure switch for gas For monitoring gas and air pressures, also for biologically produced methane, with hand wheel for switching point adjustment, can be used as ''special-design pressure switch'', EC type-tested and certified Adjusting range: 30-150 mbar Positive pressure (gas/air), negative pressure (air), differential pressure (air-air) Electrical connection via 4-pin plug, with socket Blue pilot lamp for 220/240 V AC Stat. Warennummer 90262080 Ursprungsland: DE
Dg 150u-6t

Pressure switch for gas For monitoring gas and air pressures, also for biologically produced methane, with hand wheel for switching point adjustment, can be used as ''special-design pressure switch'', EC type-tested and certified Adjusting range: 30-150 mbar Positive pressure (gas/air), negative pressure (air), differential pressure (air-air) Electrical connection via 4-pin plug, with socket Blue pilot lamp for 220/240 V AC Stat. Warennummer 90262080 Ursprungsland: DE

actuator To deliver rotational movements (0-90 °), to Operation of gas and gas Dampers, position feedback on the outside read Position indicator, protection class IP 65 Series 20, with potential-free limit switches Running time 30 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 3 Nm Three-point step control IC 20-30W3T Actuator For Transmitting rotary movements (0-90 °), for Actuation of gas and air valves, position feedback via externally readable position indicator, enclosure IP 65 Series 20, with voltage-free limit switches Running time: 30 s / 90 ° Mains voltage: 230 V AC, 50/60 Hz Torque: 3 Nm Three-point step control
Ic 20-30w3t

actuator To deliver rotational movements (0-90 °), to Operation of gas and gas Dampers, position feedback on the outside read Position indicator, protection class IP 65 Series 20, with potential-free limit switches Running time 30 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 3 Nm Three-point step control IC 20-30W3T Actuator For Transmitting rotary movements (0-90 °), for Actuation of gas and air valves, position feedback via externally readable position indicator, enclosure IP 65 Series 20, with voltage-free limit switches Running time: 30 s / 90 ° Mains voltage: 230 V AC, 50/60 Hz Torque: 3 Nm Three-point step control

SWITCH
Dg 150u-3

SWITCH

Air-pressure switch Switch housing drilled out (Rp1 / 8 connection) For monitoring of air and flue gas pressures, for overpressure, negative pressure and differential pressure, EC type tested and certified Adjustment range 0.2-3 mbar, can be used as "'pressure monitor of special design' ' Housing with screw terminals, threaded connection Rp 1/4 and hose connection with handwheel Electrical connection with screw terminals Blue Control Lamp for 220/240 V ~ DL 3A-3TZ Pressure switch for air switch housing on-drilled (Rp1 / 8 connection) For monitoring air and flue gas pressures, for positive Pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as '' special-design pressure switch '' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Blue pilot lamp for 220/240 V AC Stat. Lot number 90262080 Country of origin: DE
Dl 3a-3tz

Air-pressure switch Switch housing drilled out (Rp1 / 8 connection) For monitoring of air and flue gas pressures, for overpressure, negative pressure and differential pressure, EC type tested and certified Adjustment range 0.2-3 mbar, can be used as "'pressure monitor of special design' ' Housing with screw terminals, threaded connection Rp 1/4 and hose connection with handwheel Electrical connection with screw terminals Blue Control Lamp for 220/240 V ~ DL 3A-3TZ Pressure switch for air switch housing on-drilled (Rp1 / 8 connection) For monitoring air and flue gas pressures, for positive Pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as '' special-design pressure switch '' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Blue pilot lamp for 220/240 V AC Stat. Lot number 90262080 Country of origin: DE

DICHTUNGSREGLER
Tc410-10t

DICHTUNGSREGLER

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Huco
Huco
Bussmann Eaton
Bussmann Eaton
Gruner
Gruner
Mc Monitoring
Mc Monitoring
T.A.C. By Schneider Electric
T.A.C. By Schneider Electric