706384

706384

Gestra

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Gestra ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
706384 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Gestra Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

EAN 4049757040385
Order no. 101180190
RK86 DN50
GESTRA Disco check valve
fits between flanges
EN 1092-1, Form B1 PN 6-40 as well
ASME B16.5 Class 150/300 RF
Materials:
Case: 1.4317
Internal parts:
Stainless steels
Seal: metallic
Special spring: 700 mbar

Tüm Modeller (Gestra)
00706696 EAN 4049757022213 Cat. 1211701 RK 86A GESTRA disco check valve fits between flanges EN 1092-1, form B1 PN 6-40 as well ASME B16.5 Class 150/300 RF materials: Housing: 1.4408 Internal parts: Stainless steels metallic sealing DN 40 Spring 5 mbar
1211701

00706696 EAN 4049757022213 Cat. 1211701 RK 86A GESTRA disco check valve fits between flanges EN 1092-1, form B1 PN 6-40 as well ASME B16.5 Class 150/300 RF materials: Housing: 1.4408 Internal parts: Stainless steels metallic sealing DN 40 Spring 5 mbar

00375209 BK 45 PN 40 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Inner parts: stainless steel DN 20
7081400 Bk 45 Pn 40

00375209 BK 45 PN 40 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Inner parts: stainless steel DN 20

order number 3101141 GESTRA level switch ONE-electrode device EC type-tested as a water level limiter "special design Safety integrity level SIL 3 in connection with a level electrode NRG 1x-50 Response sensitivity: 10 mues / cm Outputs: - two separate, positively driven contacts for the safety circuit Switch-off delay: 3 sec. - An instant signal contact A test and diagnostic button An operating and alarm indicator 3 message and diagnosis LEDs Voltage: 24 V DC Weight: approx. 0.5 kg
NRS 1-50

order number 3101141 GESTRA level switch ONE-electrode device EC type-tested as a water level limiter "special design Safety integrity level SIL 3 in connection with a level electrode NRG 1x-50 Response sensitivity: 10 mues / cm Outputs: - two separate, positively driven contacts for the safety circuit Switch-off delay: 3 sec. - An instant signal contact A test and diagnostic button An operating and alarm indicator 3 message and diagnosis LEDs Voltage: 24 V DC Weight: approx. 0.5 kg

Float steam trap GESTRA UNA 45hl DN 25 PN 16 Closing body (AO): 13 duplex Connection type: flange EN 1092 PN 16 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel Equipped with: - Viewing hood with lifting device
82315100363

Float steam trap GESTRA UNA 45hl DN 25 PN 16 Closing body (AO): 13 duplex Connection type: flange EN 1092 PN 16 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel Equipped with: - Viewing hood with lifting device

MK 45/2 PN 40 GESTRA RHOMBUSline Thermal steam trap Connection: flanges EN 1092, FOrm B1 Materials: Housing, hood: 1.0460 / ASTM A105 Diaphragm: Hastelloy Other internal parts: stainless steel DN 25
7251501

MK 45/2 PN 40 GESTRA RHOMBUSline Thermal steam trap Connection: flanges EN 1092, FOrm B1 Materials: Housing, hood: 1.0460 / ASTM A105 Diaphragm: Hastelloy Other internal parts: stainless steel DN 25

Float steam trap GESTRA UNA 45hl DN 40 PN 40 Closing body (AO): 4 duplex Connection type: flange EN 1092 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel
823171005

Float steam trap GESTRA UNA 45hl DN 40 PN 40 Closing body (AO): 4 duplex Connection type: flange EN 1092 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel

Order number: 3851547 Conductivity transmitter 4 rods type LRGT 16-4 GESTRA SPECTORcompact -component-tested- Safety integrity level SIL 2 for continuous recording of the boiler conductivity Pressure rating PN 40 Delivery length: L = 600mm Measuring range: L = 0.5 - 1,000 μS / cm Connection: G 1 "EN ISO 228-1 Materials: Housing: 1.4571 Measuring electrode: 1.4571 Electrode insulation: PTFE / PEEK Connection housing: 3.2161 (G ALSI8CU3) Output: Temperature compensated 4-20mA actual value output Male / female M12 5-pin A-coded Display & operation 7-segment display with rotary and pressure switch Supply voltage: 24V DC, 4V AC Protection class: IP 65
LRGT 16-4

Order number: 3851547 Conductivity transmitter 4 rods type LRGT 16-4 GESTRA SPECTORcompact -component-tested- Safety integrity level SIL 2 for continuous recording of the boiler conductivity Pressure rating PN 40 Delivery length: L = 600mm Measuring range: L = 0.5 - 1,000 μS / cm Connection: G 1 "EN ISO 228-1 Materials: Housing: 1.4571 Measuring electrode: 1.4571 Electrode insulation: PTFE / PEEK Connection housing: 3.2161 (G ALSI8CU3) Output: Temperature compensated 4-20mA actual value output Male / female M12 5-pin A-coded Display & operation 7-segment display with rotary and pressure switch Supply voltage: 24V DC, 4V AC Protection class: IP 65

Order no. 7081500 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Internal parts: stainless steel DN 25
BK 45 PN 40

Order no. 7081500 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Internal parts: stainless steel DN 25

Order no. 0431098 SO GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for wall mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
NRA 1-3a Multi-T

Order no. 0431098 SO GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for wall mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history

GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for panel mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
NRA 1-3e (alternative for pos 2)

GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for panel mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Netgear
Netgear
Frese
Frese
Kieback Peter
Kieback Peter
Epidor
Epidor
Murtfeldt
Murtfeldt