Pump standing on gear base
Pump material: 1.4404 (316L)
Displacer: SE
Shaft sealing: see below
Elastomers: FKM with FDA certification
Connection type: see below
above: see below
below: see below
Drive: SK33-SP-112MP
Output speed: n = 133 1/min
4.0kW, n = 1450 1/min
50Hz, ISO: F, IP 55
Voltage 400/690V
Documentation exclusively according to Fristam standards, unless otherwise
confirmed.
- FDA certificate / EC1935/2004
Generally:
- Pump in vertical design
- Pump with directly flanged gear motor
- Right drive shaft - seen from the front of the pump cover
- Special paint RAL 9007 / gray aluminum
Pump head:
- Temperature displacer
- with cover bushing
Drive:
- Gearbox supplier: NORD
- with external fan suitable for:
Single-phase operation (Steinmetz circuit)
230-277V, 50Hz + 60Hz
and
Three-phase operation (delta / star connection)
220-290V / 380-500V, 50Hz
220-332V / 380-575V, 60Hz
- with PTC thermistor temperature sensor
- according to efficiency class IE3
- suitable for frequency converter operation
Control range 5-100Hz
- Gearbox with USDA H1 approved oil
- Location of terminal box: right
other agreements:
128a (2K10V2/V)
Terminal box on the left when looking at the pump cover
Connections:
Suction side above, DN 65, aseptic groove flange
DIN 11864-2, Form A, with additional
CIP connection, side, DN 50, with
crapped pneumatic disc valve
Rectangular inlet into the pump, 80 x 50 mm
Distance from center of pump to top edge of nozzle 212 mm
Pressure side below, DN 50
Aseptic threaded connector DIN 11864-1, form A
Distance from center of pump to top edge of nozzle 153 mm
