RegoSafety valve 2 1/2 "NPT AG, type RegO A3149MG, made of steel, SV for multiport, setting pressure 17.6 bar (255 PSI), without component testing, with plastic protective cap
RegoHP Regulator 3/4"F.NPT, 3-30PSI
Rego
RegoWe want to use our approximately 125 m3 cylindrical tank as an ammonia tank. We have outlets on the tank. We want to use excess flow valve on these lines. At the same time, we want to open and close pneumatically with a directional valve. The dimensions of the valves we need for this are; 1 piece DN100 1 piece DN80 1 piece DN65 2 pieces DN50 4 pieces are DN25. Our working pressure is around 9 bars. If possible, can you send the price, delivery time and data sheets of the above-mentioned valves with socket connection?
RegoVent Valve 1/4" M.NPT
RegoVALVE THREAED INTERNAL
RegoThreaded Internal Valve 3" M.NPT x 3" F.NPT
RegoThreaded Internal Valve 2" M.NPT x 2" F.NPT
RegoSemi Internal Pressure Relief Valve 2" M.NPT
RegoPressure regulator, medium pressure, output max. 247 kg / h, Inlet and outlet 3/4 "NPT IT, Type Reg0 1586MN (old), 1586VN (new), outlet pressure 0.2 to 2.1 bar, with pressure gauge connection 1/4 "NPT, with factory certificate 2.1 according to EN 10204 - GIP: without CE marking according to DGRL 2014/68 / EU
RegoMultiport 4"
RegoMultiport 3" with 3x safety valves 250 PSI
RegoMultiport 3"
RegoMG:20 KG/H Pd:28 mbar P : 035-1,4 BAR
RegoMale Quick Disconnect Vent Metric in US, M20 x 1.5 Bulkhead – 10 GPM
RegoMale Fuelling Receptacle with inlet 3/4” NPTF 50 GPM
RegoMale Fueling Receptacle 37° SAE flare fitting - 50 GPM
RegoHSK-A 63/ER 16 X340 XL
RegoHSK-A 63/ER 16 X260 XL