"Lutz-Jesco" markasına ait modeller;
Shaft protection sleeve with raceway for mechanical seal Ø35 Mathcode:: SHAFT PROTECTION SLEEVE Customs tariff number: 84139100 Weight: 0.196 kg + 59005 Kleber Weicon VA300 - 12 g
52897

Lutz-Jesco
Shaft protection sleeve with raceway for mechanical seal Ø35 Mathcode:: SHAFT PROTECTION SLEEVE Customs tariff number: 84139100 Weight: 0.196 kg + 59005 Kleber Weicon VA300 - 12 g
Control cable PVC length 2 m with M12x1 coupling, 4-pin, A-coded CONTROL CABLE Use for the following functions possible: - external release - pulse output - Analog input - Pulse input - level monitoring Nominal voltage <= 300 V
79113

Lutz-Jesco
Control cable PVC length 2 m with M12x1 coupling, 4-pin, A-coded CONTROL CABLE Use for the following functions possible: - external release - pulse output - Analog input - Pulse input - level monitoring Nominal voltage <= 300 V
Control cable PVC length 2 m with coupling M12x1 4-pin B-coded CONTROL CABLE Fault signal relay contacts output Nominal voltage <= 300 V
79112

Lutz-Jesco
Control cable PVC length 2 m with coupling M12x1 4-pin B-coded CONTROL CABLE Fault signal relay contacts output Nominal voltage <= 300 V
45GCN30AP010-AP020 Material: PP 0,48-13,5m3/h max.1,84g/cm3 0,55Kw 2900rpm 400V AC 50Hz Komplett mit Rohr und befestigungen
P-110 A/Y

Lutz-Jesco
45GCN30AP010-AP020 Material: PP 0,48-13,5m3/h max.1,84g/cm3 0,55Kw 2900rpm 400V AC 50Hz Komplett mit Rohr und befestigungen
45GCN20AP010-AP020 Material: PVDF 0,48-13,5m3/h max.1,84g/cm3 0,55Kw 2900rpm 400V AC 50Hz Komplett mit Rohr und befestigungen
P-109 A/Y

Lutz-Jesco
45GCN20AP010-AP020 Material: PVDF 0,48-13,5m3/h max.1,84g/cm3 0,55Kw 2900rpm 400V AC 50Hz Komplett mit Rohr und befestigungen
10231003 0102P0020CC031A2K2KC1ZC1Z00 Magnetic diaphragm metering pump Product: MAGDOS Type: LP Delivery rate: 1.9 l / h at 16 bar - 2.3 l / h at 8 bar Capacity adjustment: stroke frequency adjustable 0 - 160 strokes / min Material dosing head and valves: PVC Control unit: 110 - 240 V + 5 / -10%, 50/60 Hz Electrical connection: 1.8 m power cord with plug, Europe (at 230 V AC) Suction valve DN4: double ball ceramic / PVDF / FPM (ball / seat / seal) Pressure valve DN4: double ball ceramic / PVDF / FPM (ball / seat / seal) Suction connection material: PVC Suction connection: Hose clamp connection set 4/6, 6/9 and 6/12 Material pressure connection: PVC Pressure connection: hose clamp connection set 4/6, 6/9 and 6/12 Dosing head arrangement: floor mounting Option: without Functions Stroke frequency precisely adjustable with the keyboard
Magdos Lp 2 Pvc/Fpm

Lutz-Jesco
10231003 0102P0020CC031A2K2KC1ZC1Z00 Magnetic diaphragm metering pump Product: MAGDOS Type: LP Delivery rate: 1.9 l / h at 16 bar - 2.3 l / h at 8 bar Capacity adjustment: stroke frequency adjustable 0 - 160 strokes / min Material dosing head and valves: PVC Control unit: 110 - 240 V + 5 / -10%, 50/60 Hz Electrical connection: 1.8 m power cord with plug, Europe (at 230 V AC) Suction valve DN4: double ball ceramic / PVDF / FPM (ball / seat / seal) Pressure valve DN4: double ball ceramic / PVDF / FPM (ball / seat / seal) Suction connection material: PVC Suction connection: Hose clamp connection set 4/6, 6/9 and 6/12 Material pressure connection: PVC Pressure connection: hose clamp connection set 4/6, 6/9 and 6/12 Dosing head arrangement: floor mounting Option: without Functions Stroke frequency precisely adjustable with the keyboard
0102P0005AC031A2K2KC1ZC1Z00 Magnetic diaphragm metering pump Product: MAGDOS Type: LP Flow rate: 0.36 l / h at 16 bar - 0.54 l / h at 8 bar Capacity adjustment: stroke frequency adjustable 0 - 120 strokes / min Material dosing head and valves: PVC Control unit: 110 - 240 V + 5 / -10%, 50/60 Hz Electrical connection: 1.8 m power cord with plug, Europe (at 230 V AC) Suction valve DN3: double ball ceramic / PVDF / FPM (ball / seat / seal) Pressure valve DN3: double ball ceramic / PVDF / FPM (ball / seat / seal) Suction connection material: PVC Suction connection: Hose clamp connection set 4/6, 6/9 and 6/12 Material pressure connection: PVC Pressure connection: hose clamp connection set 4/6, 6/9 and 6/12 Dosing head arrangement: floor mounting Option: without
Magdos Lp 05 Pvc/Fpm

Lutz-Jesco
0102P0005AC031A2K2KC1ZC1Z00 Magnetic diaphragm metering pump Product: MAGDOS Type: LP Flow rate: 0.36 l / h at 16 bar - 0.54 l / h at 8 bar Capacity adjustment: stroke frequency adjustable 0 - 120 strokes / min Material dosing head and valves: PVC Control unit: 110 - 240 V + 5 / -10%, 50/60 Hz Electrical connection: 1.8 m power cord with plug, Europe (at 230 V AC) Suction valve DN3: double ball ceramic / PVDF / FPM (ball / seat / seal) Pressure valve DN3: double ball ceramic / PVDF / FPM (ball / seat / seal) Suction connection material: PVC Suction connection: Hose clamp connection set 4/6, 6/9 and 6/12 Material pressure connection: PVC Pressure connection: hose clamp connection set 4/6, 6/9 and 6/12 Dosing head arrangement: floor mounting Option: without
Suction nozzle DN80 PP/EPDM N/BN 50-160
69000

Lutz-Jesco
Suction nozzle DN80 PP/EPDM N/BN 50-160
suction line Match code: 0122N0010C5U1100BP200K0025S suction lines Product: suction line Execution: rigid, non-return valve, level monitoring, protective tube Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: threaded pin G3/4 outside Suction line length: 1100 mm Gasket material: FPM + EPDM (both included) Level monitoring: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screw cap K60x6 Special version: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: normally open when the level rises Electrical load capacity of the float switch Switching voltage: max. < 50 V DC; < 50VAC Switching current: max. 1 A Switching capacity: max. 20 VA (contact protection relay for inductive loads)
SDL-2 DN10 PVC L=1100

Lutz-Jesco
suction line Match code: 0122N0010C5U1100BP200K0025S suction lines Product: suction line Execution: rigid, non-return valve, level monitoring, protective tube Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: threaded pin G3/4 outside Suction line length: 1100 mm Gasket material: FPM + EPDM (both included) Level monitoring: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screw cap K60x6 Special version: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: normally open when the level rises Electrical load capacity of the float switch Switching voltage: max. < 50 V DC; < 50VAC Switching current: max. 1 A Switching capacity: max. 20 VA (contact protection relay for inductive loads)
Suction Line 0122N0010C5U1100BP200K0025S Suction lines Poduct: Suction line Version: Rigid, non-return valve, level control, protection pipe Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: Threaded spigot G3/4 M Suction line length: 1100 mm Gasket material: FPM + EPDM (both added) Level control: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screwing cap K60x6 Special design: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: Contact on rising level Switching voltage: max. < 50 V DC; < 50 V AC Switching current: max. 1 A Switching power: max. 20 VA (protective contact relays at inductive loads)
SDL-2 DN10 PVC L=1100

Lutz-Jesco
Suction Line 0122N0010C5U1100BP200K0025S Suction lines Poduct: Suction line Version: Rigid, non-return valve, level control, protection pipe Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: Threaded spigot G3/4 M Suction line length: 1100 mm Gasket material: FPM + EPDM (both added) Level control: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screwing cap K60x6 Special design: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: Contact on rising level Switching voltage: max. < 50 V DC; < 50 V AC Switching current: max. 1 A Switching power: max. 20 VA (protective contact relays at inductive loads)
Stud bolt set for BN and N pumps for mechanical seal B2D and B2Q E-steel STUD BOLT SET
68177

Lutz-Jesco
Stud bolt set for BN and N pumps for mechanical seal B2D and B2Q E-steel STUD BOLT SET
Spiral casing for N/BN 50-160 PP
50211

Lutz-Jesco
Spiral casing for N/BN 50-160 PP
Shaft set for bearing bracket A1 Ø35 1.4305/pc
68487

Lutz-Jesco
Shaft set for bearing bracket A1 Ø35 1.4305/pc
O-Ring-Satz N/BN 50-160,50-200 EPDM
68059

Lutz-Jesco
O-Ring-Satz N/BN 50-160,50-200 EPDM
Motor diaphragm dosing pump 0104A0004CF11A2K2KC1FC1F Product: MEMDOS Type: LA Flow rate: 4 l/h at 50/60 Hz against max. 12 bar Material dosing head and valves: PVC Electric drive: 230 V 1ph 50/60 Hz 0.37 kW with motor 0.18 kW Electrical connection: 1.8 m power cable with plug, Europe (at 230 V AC) Suction valve: DN4 double ball ceramic/PVDF/FPM (ball/seat/seal) Pressure valve: DN4 double ball ceramic/PVDF/FPM (ball/seat/seal) Material suction connection: PVC Suction connection: hose clamp connection 6/12, short Material pressure connection: PVC Pressure connection: hose clamp connection 6/12, short Functions: Stroke frequency can be adjusted from 0 - 100% using a potentiometer Signal LEDs for status, operation and error display Analogue input 0/4 - 20mA Level input with main alarm Release input for external start/stop Hub feedback output alarm relay output Analogue output 0/4 - 20mA ---- A NOTICE: The successor to the MEMDOS DX type, the MEMDOS LP, is currently not available. We offer another alternative here.
MEMDOS LA 4 PVC/FPM

Lutz-Jesco
Motor diaphragm dosing pump 0104A0004CF11A2K2KC1FC1F Product: MEMDOS Type: LA Flow rate: 4 l/h at 50/60 Hz against max. 12 bar Material dosing head and valves: PVC Electric drive: 230 V 1ph 50/60 Hz 0.37 kW with motor 0.18 kW Electrical connection: 1.8 m power cable with plug, Europe (at 230 V AC) Suction valve: DN4 double ball ceramic/PVDF/FPM (ball/seat/seal) Pressure valve: DN4 double ball ceramic/PVDF/FPM (ball/seat/seal) Material suction connection: PVC Suction connection: hose clamp connection 6/12, short Material pressure connection: PVC Pressure connection: hose clamp connection 6/12, short Functions: Stroke frequency can be adjusted from 0 - 100% using a potentiometer Signal LEDs for status, operation and error display Analogue input 0/4 - 20mA Level input with main alarm Release input for external start/stop Hub feedback output alarm relay output Analogue output 0/4 - 20mA ---- A NOTICE: The successor to the MEMDOS DX type, the MEMDOS LP, is currently not available. We offer another alternative here.
Membrane flange for membrane Ø52 PP/Ms MEMDOS E/DX 4 - 25 + 83619 Cylinder screw M6x20 DIN 912 A2 + 29462 Membrane insert for membrane Ø52 PPO + 80816 O-ring Ø79x2.5 NBR + 34868 Diaphragm rod M4 1.4305 MEMDOS E/DX - 75 + 80814 Compact seal Ø14/22x5.5 94AU925 + Wiper Ø14/22x7 Type AUASOB Simritan + 81464 Diaphragm Ø52 EPDM/PTFE-coated Base material 70EPDM281 with fabric insert
34877

Lutz-Jesco
Membrane flange for membrane Ø52 PP/Ms MEMDOS E/DX 4 - 25 + 83619 Cylinder screw M6x20 DIN 912 A2 + 29462 Membrane insert for membrane Ø52 PPO + 80816 O-ring Ø79x2.5 NBR + 34868 Diaphragm rod M4 1.4305 MEMDOS E/DX - 75 + 80814 Compact seal Ø14/22x5.5 94AU925 + Wiper Ø14/22x7 Type AUASOB Simritan + 81464 Diaphragm Ø52 EPDM/PTFE-coated Base material 70EPDM281 with fabric insert
Impeller cap LH for shaft Ø35 PP/Ms58
50289

Lutz-Jesco
Impeller cap LH for shaft Ø35 PP/Ms58
GLRD 35 E Mechanical seal Ø35 eMG1/35-G7 Q7 Q1 EGG independent of direction of rotation complete with split pin
68531

Lutz-Jesco
GLRD 35 E Mechanical seal Ø35 eMG1/35-G7 Q7 Q1 EGG independent of direction of rotation complete with split pin
Bearing carrier housing set A1
68484

Lutz-Jesco
Bearing carrier housing set A1
Bearing cap set for bearing bracket A1 N 32/40/50-200, N 50-160
68485

Lutz-Jesco
Bearing cap set for bearing bracket A1 N 32/40/50-200, N 50-160