"Csf Inox" markasına ait modeller;
Steam-water mixer M34+Temp 1.4301 AISI 304 / 1.4301(EN 10088-1) HS code: 84818099 Country of origin: IT ITALY
WMIB034A02T

Csf Inox
Steam-water mixer M34+Temp 1.4301 AISI 304 / 1.4301(EN 10088-1) HS code: 84818099 Country of origin: IT ITALY
Stator M80-1 NBR NBR SPP841 / NBR SPP841
TADGA0008

Csf Inox
Stator M80-1 NBR NBR SPP841 / NBR SPP841
Stator M65-4 NBR NBR-L G064B schwarz / NBR-L G064Bschwarz
TADGA0507

Csf Inox
Stator M65-4 NBR NBR-L G064B schwarz / NBR-L G064Bschwarz
Stator M140-L MO2954 EPDM F065A FG / EPDM F065A FG
TADGB0630

Csf Inox
Stator M140-L MO2954 EPDM F065A FG / EPDM F065A FG
Spray gun RB65 M34 1/2 "FEM / 20 Composito HS code: 84242000 Country of origin: IT ITALY
WMIO000O07C

Csf Inox
Spray gun RB65 M34 1/2 "FEM / 20 Composito HS code: 84242000 Country of origin: IT ITALY
Seal S03-P PA80-100A H-ECOP/SIL.70 H-ECOPUR/.
TGKTG1150

Csf Inox
Seal S03-P PA80-100A H-ECOP/SIL.70 H-ECOPUR/.
Same as S / N C106256 KCS50 Centrifugal pump AISI316L TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYED MEDIUM: CONVEYING MEDIUM (1): SCIROPPO NEUTRO 56 ÷ 65 ° BX CLEANING MEDIUM (CIP): C.I.P. (SODA 1 ÷ 3% NITRIC ACID 1 ÷ 3%) MAX TEMPERATURE: 85 ° C MINIMUM TEMPERATURE: 35 ° C DENSITY: 1-1.3 kg / dm³ VISCOSITY: 1-60 cP SOLIDS CONTENT: NOT AVAILABLE OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OPERATING POINT: FLOW RATE (1): 15 m³ / h DELIVERY HEIGHT (1): 63 m FREQUENCY (1): 50 Hz OPERATION: WITH FREQUENCY CONVERTER (ON SITE) | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH CALOTF FEET BONNET: WITH BONNET (1.4301 / AISI 304) SUCTION FITTING: DIN 11851 DN65 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN50 EXTERNAL THREAD MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM (FDA) OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED CONNECTION FLUSHING LINE: 1/8 "G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACES: PROD .: TUC / TUC - ATMOS .: TUC / CARB ELASTOMERS: EPDM UNIT TYPE CSF CODE: 877 7R37X-HX-73V7-HX (72) ELECTRIC MOTOR: MULTIVOLTAGE IE3-EISA IP55, CL.F SPEED: 2900 RPM (50HZ) MOTOR POWER: 15 KW MOTOR VOLTAGE: 400 / 690V D / Y (STD) ± 5% MOTOR PROTECTION: WITH PTC | -------------------------------------- ------------ ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A, 2006/42 / CEE) DOC.C.CE .. .. .. TECHNICAL DATA PUMP: PN MAX 10 BAR T MAX 100 ° C DOCUMENTS: OPERATING MANUAL DOCICS CONFORMITY EG1935 / 2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH PARTS LIST DOCA2678
CS 50-210-2-20/BM.PQ72

Csf Inox
Same as S / N C106256 KCS50 Centrifugal pump AISI316L TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYED MEDIUM: CONVEYING MEDIUM (1): SCIROPPO NEUTRO 56 ÷ 65 ° BX CLEANING MEDIUM (CIP): C.I.P. (SODA 1 ÷ 3% NITRIC ACID 1 ÷ 3%) MAX TEMPERATURE: 85 ° C MINIMUM TEMPERATURE: 35 ° C DENSITY: 1-1.3 kg / dm³ VISCOSITY: 1-60 cP SOLIDS CONTENT: NOT AVAILABLE OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OPERATING POINT: FLOW RATE (1): 15 m³ / h DELIVERY HEIGHT (1): 63 m FREQUENCY (1): 50 Hz OPERATION: WITH FREQUENCY CONVERTER (ON SITE) | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH CALOTF FEET BONNET: WITH BONNET (1.4301 / AISI 304) SUCTION FITTING: DIN 11851 DN65 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN50 EXTERNAL THREAD MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM (FDA) OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED CONNECTION FLUSHING LINE: 1/8 "G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACES: PROD .: TUC / TUC - ATMOS .: TUC / CARB ELASTOMERS: EPDM UNIT TYPE CSF CODE: 877 7R37X-HX-73V7-HX (72) ELECTRIC MOTOR: MULTIVOLTAGE IE3-EISA IP55, CL.F SPEED: 2900 RPM (50HZ) MOTOR POWER: 15 KW MOTOR VOLTAGE: 400 / 690V D / Y (STD) ± 5% MOTOR PROTECTION: WITH PTC | -------------------------------------- ------------ ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A, 2006/42 / CEE) DOC.C.CE .. .. .. TECHNICAL DATA PUMP: PN MAX 10 BAR T MAX 100 ° C DOCUMENTS: OPERATING MANUAL DOCICS CONFORMITY EG1935 / 2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH PARTS LIST DOCA2678
Rotor, Drm. reduziert M65-4 AISI316L / 1.4404(EN10088-1)
TACBB0506.R

Csf Inox
Rotor, Drm. reduziert M65-4 AISI316L / 1.4404(EN10088-1)
O-Ring 6795 EPDM FDA EPDM
RAAGM6795F

Csf Inox
O-Ring 6795 EPDM FDA EPDM
O-Ring 6670 EPDM FDA EPDM / .
RAAGM6670F

Csf Inox
O-Ring 6670 EPDM FDA EPDM / .
O-Ring 4537 FDA EPDM /
RAAGM4537A

Csf Inox
O-Ring 4537 FDA EPDM /
O-Ring 4537 FDA .CERT.FDA-1935/2004 EPDM /
RAAGM4650A

Csf Inox
O-Ring 4537 FDA .CERT.FDA-1935/2004 EPDM /
O-Ring 4500 126,6X3,53 FDA NBR / .
RAAGA4500F

Csf Inox
O-Ring 4500 126,6X3,53 FDA NBR / .
O-Ring 2262 NBR NBR / .
RAAGA2262

Csf Inox
O-Ring 2262 NBR NBR / .
O-Ring 2112 EPDM FDA/3A . 28,3X1,78 EPDM / .
RAAGM2112F

Csf Inox
O-Ring 2112 EPDM FDA/3A . 28,3X1,78 EPDM / .
Motor piston PAA80 PAA152 FE350 UNI7070 /. HS code: 84139100 "Replacement for PA 50I-80-L / B.B2P10T13 S / N P031433"
TDFFA0050

Csf Inox
Motor piston PAA80 PAA152 FE350 UNI7070 /. HS code: 84139100 "Replacement for PA 50I-80-L / B.B2P10T13 S / N P031433"
KMRE1 MCRE 115-1/AA.T32 Eccentric screw pump AISI304 PRODUCT INFORMATION: CONVEYING MEDIUM (1): FRUIT PUREE JOB DESCRIPTION: ALIMENTAZIONE PASSATRICE TEMPERATURE MAX.: 20°C DENSITY: 1.1 kg/dm³ MORE INFORMATION OPERATION: SUCTION CONNECTION: FROM FEED FUNNEL PERFORMANCE REQUIREMENTS: FLOW RATE (1): 16 m³/h PRESSURE (1): 4 bar SPEED AT THE OPERATING POINT (1): 250 1/min | -------------------------------------- ------------ ---------------------------- MOUNTING ARRANGEMENT: BLOCK VERSION WITH FUNNEL + CRUSHER VERTICAL CONNECTION: FILLING FUNNEL + SCREW CONVEYOR RESIDUAL EMPTYING FILL FUNNEL: DIN 11851 DN50 HORIZONTAL CONNECTION: DN100 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4301 (AISI 304) ELASTOMERIC PUMP: NBR, FOOD SAFE ELASTOMER STATOR: NBR, FOOD SAFE STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACES: TUC/TUC BRAZED ELASTOMERS: EPDM CSF CODE: RED 2+8 X7337+PIN (32) BIDIRECTIONAL. | -------------------------------------- ------------ ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H081FM GEAR RATIO 5.54 DRIVE DELIVERY TO CSF ENGINE POWER: 7.5KW MOTOR VOLTAGE: ACCORDING TO CUSTOMER MOTOR (50HZ) ENGINE BRIDGE CRUSHER: POWER: 1.1 KW HOURS. VOLTAGE: 230/400V D/Y (50HZ) SETUP: BASE PLATE: 400X1620 mm BASE PLATE MATERIAL: STAINLESS STEEL | -------------------------------------- ------------ ---------------------------- DECLARATIONS OF CONFORMITY: MANUFACTURER DECLARATION-ANN.II.B,2006/42/CEE DOC.C.CO .. .. .. TECHNICAL DATA PUMP: PRESS.DIFF. MAX 6 BAR T MAX 69°C DOCUMENTS: OPERATING INSTRUCTIONS DOCIMC COMPLIANCE EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA3271 SECTIONAL DRAWING OF DRIVE BRIDGE BRUSHER DOCA3256
S/N M035287

Csf Inox
KMRE1 MCRE 115-1/AA.T32 Eccentric screw pump AISI304 PRODUCT INFORMATION: CONVEYING MEDIUM (1): FRUIT PUREE JOB DESCRIPTION: ALIMENTAZIONE PASSATRICE TEMPERATURE MAX.: 20°C DENSITY: 1.1 kg/dm³ MORE INFORMATION OPERATION: SUCTION CONNECTION: FROM FEED FUNNEL PERFORMANCE REQUIREMENTS: FLOW RATE (1): 16 m³/h PRESSURE (1): 4 bar SPEED AT THE OPERATING POINT (1): 250 1/min | -------------------------------------- ------------ ---------------------------- MOUNTING ARRANGEMENT: BLOCK VERSION WITH FUNNEL + CRUSHER VERTICAL CONNECTION: FILLING FUNNEL + SCREW CONVEYOR RESIDUAL EMPTYING FILL FUNNEL: DIN 11851 DN50 HORIZONTAL CONNECTION: DN100 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4301 (AISI 304) ELASTOMERIC PUMP: NBR, FOOD SAFE ELASTOMER STATOR: NBR, FOOD SAFE STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACES: TUC/TUC BRAZED ELASTOMERS: EPDM CSF CODE: RED 2+8 X7337+PIN (32) BIDIRECTIONAL. | -------------------------------------- ------------ ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H081FM GEAR RATIO 5.54 DRIVE DELIVERY TO CSF ENGINE POWER: 7.5KW MOTOR VOLTAGE: ACCORDING TO CUSTOMER MOTOR (50HZ) ENGINE BRIDGE CRUSHER: POWER: 1.1 KW HOURS. VOLTAGE: 230/400V D/Y (50HZ) SETUP: BASE PLATE: 400X1620 mm BASE PLATE MATERIAL: STAINLESS STEEL | -------------------------------------- ------------ ---------------------------- DECLARATIONS OF CONFORMITY: MANUFACTURER DECLARATION-ANN.II.B,2006/42/CEE DOC.C.CO .. .. .. TECHNICAL DATA PUMP: PRESS.DIFF. MAX 6 BAR T MAX 69°C DOCUMENTS: OPERATING INSTRUCTIONS DOCIMC COMPLIANCE EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA3271 SECTIONAL DRAWING OF DRIVE BRIDGE BRUSHER DOCA3256
KMAE1 MAE 115-1/AA.ET32 Eccentric screw pump AISI304 PRODUCT INFORMATION: CONVEYING MEDIUM (1): FRUIT PUREE JOB DESCRIPTION: ESTRAZIONE DA PASSATRICE TEMPERATURE MAX: 80°C DENSITY: 1.1 kg/dm³ MORE INFORMATION OPERATION: SUCTION CONNECTION: FROM PUMP HOUSING PERFORMANCE REQUIREMENTS: FLOW RATE (1): 16 m³/h PRESSURE (1): 4 bar SPEED AT THE OPERATING POINT (1): 250 1/min | -------------------------------------- ------------ ---------------------------- MOUNTING ARRANGEMENT: BLOCK DESIGN VERTICAL CONNECTION: DN100 DIN 11851 MALE THREAD HORIZONTAL CONNECTION: DN100 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4301 (AISI 304) ELASTOMERIC PUMP: NBR, FOOD SAFE ELASTOMER STATOR: NBR, FOOD SAFE STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACES: TUC/TUC BRAZED ELASTOMERS: EPDM CSF CODE: RED 2+8 X7337+PIN (32) BIDIRECTIONAL. | -------------------------------------- ------------ ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H081FM GEAR RATIO 5.54 DRIVE DELIVERY TO CSF ENGINE POWER: 7.5KW MOTOR VOLTAGE: ACCORDING TO CUSTOMER MOTOR (50HZ) SETUP: BASE PLATE: 350X1230 mm BASE PLATE MATERIAL: STAINLESS STEEL SPECIAL VERSIONS: + ROTOR WITH REDUCED DIAMETER | -------------------------------------- ------------ ---------------------------- DECLARATIONS OF CONFORMITY: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. TECHNICAL DATA PUMP: PRESS.DIFF. MAX 6 BAR T MAX 95°C DOCUMENTS: DOCIMO OPERATING INSTRUCTIONS COMPLIANCE EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA3280
S/N M035289

Csf Inox
KMAE1 MAE 115-1/AA.ET32 Eccentric screw pump AISI304 PRODUCT INFORMATION: CONVEYING MEDIUM (1): FRUIT PUREE JOB DESCRIPTION: ESTRAZIONE DA PASSATRICE TEMPERATURE MAX: 80°C DENSITY: 1.1 kg/dm³ MORE INFORMATION OPERATION: SUCTION CONNECTION: FROM PUMP HOUSING PERFORMANCE REQUIREMENTS: FLOW RATE (1): 16 m³/h PRESSURE (1): 4 bar SPEED AT THE OPERATING POINT (1): 250 1/min | -------------------------------------- ------------ ---------------------------- MOUNTING ARRANGEMENT: BLOCK DESIGN VERTICAL CONNECTION: DN100 DIN 11851 MALE THREAD HORIZONTAL CONNECTION: DN100 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4301 (AISI 304) ELASTOMERIC PUMP: NBR, FOOD SAFE ELASTOMER STATOR: NBR, FOOD SAFE STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACES: TUC/TUC BRAZED ELASTOMERS: EPDM CSF CODE: RED 2+8 X7337+PIN (32) BIDIRECTIONAL. | -------------------------------------- ------------ ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H081FM GEAR RATIO 5.54 DRIVE DELIVERY TO CSF ENGINE POWER: 7.5KW MOTOR VOLTAGE: ACCORDING TO CUSTOMER MOTOR (50HZ) SETUP: BASE PLATE: 350X1230 mm BASE PLATE MATERIAL: STAINLESS STEEL SPECIAL VERSIONS: + ROTOR WITH REDUCED DIAMETER | -------------------------------------- ------------ ---------------------------- DECLARATIONS OF CONFORMITY: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. TECHNICAL DATA PUMP: PRESS.DIFF. MAX 6 BAR T MAX 95°C DOCUMENTS: DOCIMO OPERATING INSTRUCTIONS COMPLIANCE EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA3280
KMAE0 eccentric pump AISI316 HS code: 84136070 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| PRODUCT INFORMATION: DESCRIPTION: Polyelectrolytes JOB DESCRIPTION: Transfer MAX TEMPERATURE: 20°C VISCOSITY: 1,000 cP SOLID CONTENT: NOT PRESENT MORE INFORMATION OPERATION: SUCTION PORT: FROM PUMP HOUSING PERFORMANCE REQUIREMENTS: FLOW RATE (1): 2.0 m³/h PRESSURE (1): 3.0 bar SPEED AT DUTY POINT (1): 376 rpm | -------------------------------------- ------------------------- ---------------------------- MOUNTING ARRANGEMENT: BLOCK VERSION VERTICAL CONNECTION: DN50 DIN 11851 MALE THREAD HORIZONTAL CONNECTION: DN50 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4401 (AISI 316) ELASTOMER PUMP: FPM ELASTOMER STATOR: FPM STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: 316/CARBON ELASTOMERS: FPM CSF CODE: RED 2+8 XYXZY (33) BIDIRECTIONAL. | -------------------------------------- ------------------------- ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H051FM GEAR RATIO 3.69 N2 (MIN¹) 4POLE: 385 ---------------------------------------- ----------------------- ------------------------------ ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f MOTOR SPEED: 1450RPM (50HZ) MOTOR POWER: 1.5KW MOTOR VOLTAGE: 230/400V-220/380V-240/415V D/Y(STD) MOTOR PROTECTION: WITH PTC ---------------------------------------- ----------------------- ------------------------------ INSTALLATION: WITHOUT BASE PLATE | -------------------------------------- ------------------------- ---------------------------- DECLARATION OF CONFORMITY: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 6 BAR TMAX 69°C DOCUMENTS: OPERATING INSTRUCTIONS DOCIMO SECTIONAL DRAWING WITH BOM LIST DOCA2606 | -------------------------------------- ------------------------- ----------------------------------------| Country of origin: IT ITALY
MAE 50-1/BD.T33D

Csf Inox
KMAE0 eccentric pump AISI316 HS code: 84136070 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| PRODUCT INFORMATION: DESCRIPTION: Polyelectrolytes JOB DESCRIPTION: Transfer MAX TEMPERATURE: 20°C VISCOSITY: 1,000 cP SOLID CONTENT: NOT PRESENT MORE INFORMATION OPERATION: SUCTION PORT: FROM PUMP HOUSING PERFORMANCE REQUIREMENTS: FLOW RATE (1): 2.0 m³/h PRESSURE (1): 3.0 bar SPEED AT DUTY POINT (1): 376 rpm | -------------------------------------- ------------------------- ---------------------------- MOUNTING ARRANGEMENT: BLOCK VERSION VERTICAL CONNECTION: DN50 DIN 11851 MALE THREAD HORIZONTAL CONNECTION: DN50 DIN 11851 MALE THREAD MATERIAL PUMP: DIN 1.4401 (AISI 316) ELASTOMER PUMP: FPM ELASTOMER STATOR: FPM STATOR VARIANT: SINGLE STAGE MECHANICAL SEAL: INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: 316/CARBON ELASTOMERS: FPM CSF CODE: RED 2+8 XYXZY (33) BIDIRECTIONAL. | -------------------------------------- ------------------------- ---------------------------- DRIVE: MOTOVARIO TRANSMISSION H051FM GEAR RATIO 3.69 N2 (MIN¹) 4POLE: 385 ---------------------------------------- ----------------------- ------------------------------ ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f MOTOR SPEED: 1450RPM (50HZ) MOTOR POWER: 1.5KW MOTOR VOLTAGE: 230/400V-220/380V-240/415V D/Y(STD) MOTOR PROTECTION: WITH PTC ---------------------------------------- ----------------------- ------------------------------ INSTALLATION: WITHOUT BASE PLATE | -------------------------------------- ------------------------- ---------------------------- DECLARATION OF CONFORMITY: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 6 BAR TMAX 69°C DOCUMENTS: OPERATING INSTRUCTIONS DOCIMO SECTIONAL DRAWING WITH BOM LIST DOCA2606 | -------------------------------------- ------------------------- ----------------------------------------| Country of origin: IT ITALY
Kit seals PA140A-LB5P40T30 H+DI Virgin PTFE
KPA140LDGA30

Csf Inox
Kit seals PA140A-LB5P40T30 H+DI Virgin PTFE