Actuated Butterfly valves

Auma

Teslimat Seçenekleri
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Auma ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Actuated Butterfly valves ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Auma Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Butterfly valves specified with actuator in the order sheet; It will be used in the SCADA system and will be purchased equipped with actuators suitable for the SCADA system. The torque values ​​of the actuators should be selected considering the diameters and pressures of the valves. In the speed selection of the actuator, the appropriate speed that will open/close in the shortest possible time should be selected in accordance with the valve diameter, without creating a shock effect.

Actuators to be used in all diameters will be of one brand. Electric actuators will have the capacity to be used in continuous or intermittent currents, including the motor and accessories, and will be manufactured in accordance with International standards. Actuators; It shall have the appropriate torque range required for the control of the valves under all conditions (including the effect of local forces and in case of re-commissioning after a long time).

The protection class of the actuators will be at least IP67. Actuators shall have adjustable limit switches (2 pcs) for fully open - fully closed position and adjustable torque switches (2 pcs) to close the power circuit when there is an obstruction in the direction of rotation. Actuators shall be supplied fully protected against corrosion.

Climate Conditions: Ambient temperature: ( -25 ) i ( + 40 )°C

Relative Humidity: (50%) i (80%)

DN150 PN16 electric actuator (butterfly valve compatible)
piece 10

DN200 PN16 electric actuator (butterfly valve compatible)
piece 4

DN250 PN25 electric actuator (butterfly valve compatible)
piece4

DN300 PN25 electric actuator (butterfly valve compatible)
piece 4

Rotary actuator AUMA-NORM
Identification: 13462789

Item net weight: 83.00 kg (individual weight: 83,000 kg)
Customs tariff number: 85015220
Valve attachment F16 F16 according to EN ISO 5210
Output B1-80 B1, bore 80mm, DIN6885.1
Spindle protection 200 200 mm
Output speed 45 45 1 / min
Operating mode 1 S2 - 15 min
Temperature version N-30 -70 -30 ° C - + 70 ° C
Corrosion protection KS-P1.001 powder coating,
Primer, top coat
Color A0001 AUMA silver gray
Degree of protection IP68 IP68 according to EN 60529
Handwheel 500 500mm, aluminum
Mains voltage 400/50/3 400V 50Hz 3-ph AC
Insulation class F F, tropicalized
Motor protection 00 thermal switch 140 ° C NC
Motor AD00112-4-3.00 3kW, 4-pole three-phase motor
Torque 400-1000 setting range 400-1000 Nm
set CLOSED 1000 Nm in direction of rotation CLOSED
set to 1000 Nm in the direction of rotation
Position transmitter 40.2 EEC 2-pipe system
Value RWG / IWG 4-20 4-20 mA
Mech. Position display 11 with symbols OPEN / CLOSE
Travel set to 24.5 U / STROKE on the rotary drive output
Reduction gears 10.1 Gearbox with fixed lower
settlement ratio
Limit switching 300 1.5-500 rev / stroke adjustable
Torque switch 6 single switches Ag (1 NC / 1 NO)
per direction
Limit switch 8.2 Tandem switch Ag (2 NC / 2 NO)
per directions
Heating 22.5 24V in connection with AM / AC / VM
Resistance heating 5W
Running display 24 flasher units
Connection diagram 00R1AB-1C1-000 TPA
Electrical connection S0-000 plug for AM / SEM / AC attachment
Name plate EN-AL English, aluminum
Test according to KV 01.03.200.02 acceptance test certificate /
Factory certificate
SA 16.2 Rotary actuator AUMA-NORM

Rotary actuator AUMA-NORM Identification: 13462789 Item net weight: 83.00 kg (individual weight: 83,000 kg) Customs tariff number: 85015220 Valve attachment F16 F16 according to EN ISO 5210 Output B1-80 B1, bore 80mm, DIN6885.1 Spindle protection 200 200 mm Output speed 45 45 1 / min Operating mode 1 S2 - 15 min Temperature version N-30 -70 -30 ° C - + 70 ° C Corrosion protection KS-P1.001 powder coating, Primer, top coat Color A0001 AUMA silver gray Degree of protection IP68 IP68 according to EN 60529 Handwheel 500 500mm, aluminum Mains voltage 400/50/3 400V 50Hz 3-ph AC Insulation class F F, tropicalized Motor protection 00 thermal switch 140 ° C NC Motor AD00112-4-3.00 3kW, 4-pole three-phase motor Torque 400-1000 setting range 400-1000 Nm set CLOSED 1000 Nm in direction of rotation CLOSED set to 1000 Nm in the direction of rotation Position transmitter 40.2 EEC 2-pipe system Value RWG / IWG 4-20 4-20 mA Mech. Position display 11 with symbols OPEN / CLOSE Travel set to 24.5 U / STROKE on the rotary drive output Reduction gears 10.1 Gearbox with fixed lower settlement ratio Limit switching 300 1.5-500 rev / stroke adjustable Torque switch 6 single switches Ag (1 NC / 1 NO) per direction Limit switch 8.2 Tandem switch Ag (2 NC / 2 NO) per directions Heating 22.5 24V in connection with AM / AC / VM Resistance heating 5W Running display 24 flasher units Connection diagram 00R1AB-1C1-000 TPA Electrical connection S0-000 plug for AM / SEM / AC attachment Name plate EN-AL English, aluminum Test according to KV 01.03.200.02 acceptance test certificate / Factory certificate

Identification: 13457636

Item net weight: 48.00 kg (individual weight: 48,000 kg)
Customs tariff number: 85015100
Valve attachment F14 F14 according to EN ISO 5210
Output type C-38 C, bore 38mm, groove 20mm
Output speed 45 45 1 / min
Operating mode 1 S2 - 15 min
Temperature version N-30 -70 -30 ° C - + 70 ° C
Corrosion protection KS-P1.001 powder coating,
Primer, top coat
Color A0001 AUMA silver gray
Degree of protection IP68 IP68 according to EN 60529
Handwheel 315 315mm, aluminum
Mains voltage 400/50/3 400V 50Hz 3-ph AC
Insulation class F F, tropicalized
Motor protection 00 thermal switch 140 ° C NC
Motor AD00090-4-0.75 0.75kW, 4-pole three-phase motor
Torque 100-250 Adjustment range 100-250 Nm
set CLOSED 130 Nm in direction of rotation CLOSED
set to OPEN 150 Nm in direction of rotation OPEN
Mech. Position display 11 with symbols OPEN / CLOSE
Travel set to 14.6 U / STROKE at the rotary drive output
Reduction gears 10.2 adjustable reduction
transmission
Limit switching 300 1.5-500 rev / stroke adjustable
Torque switch 6 single switches Ag (1 NC / 1 NO)
per direction
Limit switch 8 single switches Ag (1 NC / 1 NO)
per direction
Heating 22.1 110V-250V AC / DC self-regulating
PTC heating, 5-20W
Running display 24 flasher units
Connection diagram 00R1AA-101-000 TPA
Electrical connection S0-105 M20; M25; M32 plug
Type plate EN-A2 English, stainless steel A2
Operating instructions EN English
EARTHING accessories with additional external
Ground screw
Test according to KV 01.03.200.02 acceptance test certificate /
Factory certificate
SA 14.2 multi-turn actuator AUMA-NORM

Identification: 13457636 Item net weight: 48.00 kg (individual weight: 48,000 kg) Customs tariff number: 85015100 Valve attachment F14 F14 according to EN ISO 5210 Output type C-38 C, bore 38mm, groove 20mm Output speed 45 45 1 / min Operating mode 1 S2 - 15 min Temperature version N-30 -70 -30 ° C - + 70 ° C Corrosion protection KS-P1.001 powder coating, Primer, top coat Color A0001 AUMA silver gray Degree of protection IP68 IP68 according to EN 60529 Handwheel 315 315mm, aluminum Mains voltage 400/50/3 400V 50Hz 3-ph AC Insulation class F F, tropicalized Motor protection 00 thermal switch 140 ° C NC Motor AD00090-4-0.75 0.75kW, 4-pole three-phase motor Torque 100-250 Adjustment range 100-250 Nm set CLOSED 130 Nm in direction of rotation CLOSED set to OPEN 150 Nm in direction of rotation OPEN Mech. Position display 11 with symbols OPEN / CLOSE Travel set to 14.6 U / STROKE at the rotary drive output Reduction gears 10.2 adjustable reduction transmission Limit switching 300 1.5-500 rev / stroke adjustable Torque switch 6 single switches Ag (1 NC / 1 NO) per direction Limit switch 8 single switches Ag (1 NC / 1 NO) per direction Heating 22.1 110V-250V AC / DC self-regulating PTC heating, 5-20W Running display 24 flasher units Connection diagram 00R1AA-101-000 TPA Electrical connection S0-105 M20; M25; M32 plug Type plate EN-A2 English, stainless steel A2 Operating instructions EN English EARTHING accessories with additional external Ground screw Test according to KV 01.03.200.02 acceptance test certificate / Factory certificate

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz