Zumbach

Zumbach

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Zumbach ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Zumbach ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Marka Kataloğu
Firmamız, Zumbach Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.

Zumbach Electronics, ölçüm ve kontrol teknolojileri konusunda uzmanlaşmış bir İsviçreli şirkettir. Zumbach'ın ürün yelpazesi, endüstriyel ölçüm, kontrol, görüntüleme ve izleme için kullanılan bir dizi ürünü içerebilir. Zumbach'ın ana ürün kategorileri:

Ölçüm ve İzleme Sistemleri: Zumbach, endüstriyel üretim süreçlerinde kullanılmak üzere tasarlanmış yüzey kalitesi, kalınlık, uzunluk ve çap gibi özellikleri ölçen sistemler sunar.

Kaplama ve Film Kalınlığı Ölçümü: Kaplama ve film kalınlığı ölçüm sistemleri, plastik, metal, kağıt ve benzeri malzemelerin kalınlığını hassas bir şekilde izler.

Uzunluk Ölçümü: Kablo, tel ve boru uzunluğunu ölçmek için kullanılan uzunluk ölçüm sistemleri.

Yüzey Kontrolü: Yüzey düzgünlüğünü ve kalitesini değerlendirmek için kullanılan optik yüzey kontrol sistemleri.

Optik Ölçüm Cihazları: Yüzey kalitesi, renk ve görüntü analizi için optik ölçüm cihazları.

Otomasyon ve Veri İletimi: Endüstriyel otomasyon ve veri iletimi için çözümler.

Zumbach'ın ürünleri, kablo ve tel üretimi, plastik işleme, metal işleme, kağıt üretimi, cam üretimi, tekstil, otomotiv, tıbbi cihazlar ve daha birçok endüstriyel uygulama alanında kullanılır.

Tüm Modeller (Zumbach)
Für: Zumbach USYS 10c-01b-a
N6.Ia.094.11

Für: Zumbach USYS 10c-01b-a

USYS 20-0100-A, standard without controller Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be configured for wire drawing applications, immersion depth or profile measurement. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become.
USY.0002.11000

USYS 20-0100-A, standard without controller Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be configured for wire drawing applications, immersion depth or profile measurement. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become.

Ultrasonic transducer .B 5.0 MHz/0.50"/F1"-cyl
A15 800 0425

Ultrasonic transducer .B 5.0 MHz/0.50"/F1"-cyl

STANDARD-SYSTEM Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be used for wire drawing Applications, immersion depth or profile measurement can be configured. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become. ODAC 16J diameter gauge head Compact, uniaxial diameter measuring head with semiconductor laser and telecentric f-theta optics. Laser and optics are in one built into and guarantee a robust housing (protection class IP 65). high measurement accuracy, resolution and stability. An air curtain with maintenance unit is available as an option to keep the measuring windows free from contamination. Measuring field: 16 mm Smallest product diameter: 0.05 mm Repeatability (± 3 Sigma): ± 0.0002 mm
10-6016

STANDARD-SYSTEM Diameter measuring and control system USYS 20 processor - ODAC diameter gauge head State-of-the-art measured value processor with multitasking system, based on expandable microprocessor technology for an ODAC measuring head. The basic version is for diameter measurement and control set. However, this model can also be used for wire drawing Applications, immersion depth or profile measurement can be configured. Main Functions/Features: - Desktop model or as a 19" rack for mounting in an enclosure/cabinet - High-contrast LCD monochrome display (240x128 pixels) of the measured values with a selectable resolution of up to 0.0001 mm and for configuration of the system - Lot Summary Reports (SQC) - Graphic bar display to show either the deviation from Target value or ovality - 1 serial RS-232/-422/-485 interface (configurable) for the Printout of statistics or for remote display - 1 RS-232/-422/-485 serial port for host communication or Connection to USYS Data Log (configurable, galvanically isolated) - 1 Ethernet interface for host communication or connection with USYS data log - +/- tolerance and pre-alarms - I/O connector plug with the following inputs/outputs: - 3 relay outputs for tolerance and pre-alarms - 4 digital inputs (e.g. start/stop and pause, statistics, input for events) - 5 digital outputs (tolerance alarms, pre-alarms) - 1 counter input (e.g. for line speed) - 1 analogue output +/- With the SRD option, the connections can also have 2 digital inputs and a static actuator (analogue input and output). become. ODAC 16J diameter gauge head Compact, uniaxial diameter measuring head with semiconductor laser and telecentric f-theta optics. Laser and optics are in one built into and guarantee a robust housing (protection class IP 65). high measurement accuracy, resolution and stability. An air curtain with maintenance unit is available as an option to keep the measuring windows free from contamination. Measuring field: 16 mm Smallest product diameter: 0.05 mm Repeatability (± 3 Sigma): ± 0.0002 mm

Part Number: N2.500.312.0
Central proc./operat.unit CPO 3-SM 1SC

Part Number: N2.500.312.0

Measuring head ODAC 16J ODAC 16J diameter gauge head Compact, uniaxial diameter measuring head with semiconductor laser and telecentric f-theta optics. Laser and optics are in one built into and guarantee a robust housing (protection class IP 65). high measurement accuracy, resolution and stability. An air curtain with maintenance unit is available as an option to keep the measuring windows free from contamination. Measuring field: 16 mm Smallest product diameter: 0.05 mm Repeatability (± 3 Sigma): ± 0.0002 mm
ODAC.0161.15000

Measuring head ODAC 16J ODAC 16J diameter gauge head Compact, uniaxial diameter measuring head with semiconductor laser and telecentric f-theta optics. Laser and optics are in one built into and guarantee a robust housing (protection class IP 65). high measurement accuracy, resolution and stability. An air curtain with maintenance unit is available as an option to keep the measuring windows free from contamination. Measuring field: 16 mm Smallest product diameter: 0.05 mm Repeatability (± 3 Sigma): ± 0.0002 mm

Cabel J, L6-L6 5 Meter
ODAC.9164.10050

Cabel J, L6-L6 5 Meter

A15 106 0020
A15 106 0010
B.N2,401
Emitter Odac.1001.104
Odac 18xy-Dp

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Fluke Process Instruments
Fluke Process Instruments
Lenord + Bauer
Lenord + Bauer
Microscan
Microscan
Woodworth
Woodworth
Dadco
Dadco