4051273

4051273

Schubert&Salzer

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Schubert&Salzer ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
4051273 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Schubert&Salzer Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

USB-CONNECTOR V3.0 M.

SOFTWARE DEVICECONFIG KPL.

FOR THE PARAMETERIZATION

OF SCHUBERT & SALZER DEVICES

SUITABLE FOR TYPE 8049,

Customs fee number. 9032 9000

Tüm Modeller (Schubert&Salzer)
4058343 Digital positioner type 8049-4, 24VDC, IP65 Standard housing, standard air performance El. Connection 2x M16x1.5; pneu. Connection G1 / 8 " Standard feeler rod, indicator disc PA Customs fee number. 9032 8900
8049/4p5-1s000-11-00

4058343 Digital positioner type 8049-4, 24VDC, IP65 Standard housing, standard air performance El. Connection 2x M16x1.5; pneu. Connection G1 / 8 " Standard feeler rod, indicator disc PA Customs fee number. 9032 8900

Type 7010: Angle seat valve Nominal diameter: DN 25 Type: inclined seat Connection: Whitworth pipe thread Housing material: gunmetal Seat seal: EPDM Control function: Spring closes (closing against media flow) Drive: piston Ø80mm
7010/025v101221

Type 7010: Angle seat valve Nominal diameter: DN 25 Type: inclined seat Connection: Whitworth pipe thread Housing material: gunmetal Seat seal: EPDM Control function: Spring closes (closing against media flow) Drive: piston Ø80mm

Ident number 2801373 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single acting, spring closes
4040/050v11c1t1

Ident number 2801373 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single acting, spring closes

Ident number 2803800 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single-acting, spring opens
4040/050v11c1t3

Ident number 2803800 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single-acting, spring opens

Ident number 4065118 Customs fee number. 8481 8079 Type 8044: GS control valve with piston drive (short design) Nominal diameter: DN 80 (Kvs 48; Cv 56) Function: GS piston control valve, short design (Type 8044) Design: GS1 intermediate flange design PN10-PN40 (for flanges according to DIN EN 1092-1, form B) Housing: C-steel 1.0570 or 1.0619 Safety position: Spring closes Drive: Piston ø125mm Springs: Standard spring mounting Sliding disc (movable): STN2 / STN3 Sliding disc (fixed): STN2 Kvs / Cv values: 100% (state) Characteristic: equal to% Positioner: digital positioner type 8049, 4-wire version, IP65
8044/080ve0002m--91-1zc

Ident number 4065118 Customs fee number. 8481 8079 Type 8044: GS control valve with piston drive (short design) Nominal diameter: DN 80 (Kvs 48; Cv 56) Function: GS piston control valve, short design (Type 8044) Design: GS1 intermediate flange design PN10-PN40 (for flanges according to DIN EN 1092-1, form B) Housing: C-steel 1.0570 or 1.0619 Safety position: Spring closes Drive: Piston ø125mm Springs: Standard spring mounting Sliding disc (movable): STN2 / STN3 Sliding disc (fixed): STN2 Kvs / Cv values: 100% (state) Characteristic: equal to% Positioner: digital positioner type 8049, 4-wire version, IP65

Current successor to item number 4051273 4300506 USB CONNECTOR V3.1 COMPLETE FOR PARAMETERIZATION OF SCHUBERT & SALZER DEVICE SUITABLE FOR TYPE 8049, 2030, 2032, 2040,
4051273

Current successor to item number 4051273 4300506 USB CONNECTOR V3.1 COMPLETE FOR PARAMETERIZATION OF SCHUBERT & SALZER DEVICE SUITABLE FOR TYPE 8049, 2030, 2032, 2040,

Pd225m 220
7010/080V10202CYK--7 Type 7010: angle seat valve Nominal size: DN 80 Design: angled seat Connection: Whitworth pipe thread Housing material: stainless steel Seat seal: PTFE Control function: spring closes (closes against media flow) Drive: membrane drive 250 cm² stainless steel Piston springs: 12 springs (for D250) Head piece material: head piece stainless steel and piston rod in reinforced version (16mm piston rod) Accessories: 3/2-way solenoid valve cpl. DN2, 24V DC, with plug
Ident-Nummer 4082456

7010/080V10202CYK--7 Type 7010: angle seat valve Nominal size: DN 80 Design: angled seat Connection: Whitworth pipe thread Housing material: stainless steel Seat seal: PTFE Control function: spring closes (closes against media flow) Drive: membrane drive 250 cm² stainless steel Piston springs: 12 springs (for D250) Head piece material: head piece stainless steel and piston rod in reinforced version (16mm piston rod) Accessories: 3/2-way solenoid valve cpl. DN2, 24V DC, with plug

Ident number 4078185 Customs fee number. 8481 8079 Type 8040: GS shut-off valve (long design) Nominal size: DN 50 (Kvs 45; Cv 52) Function: GS shut-off valve, long design (type 8040) Design: GS1 wafer type PN10-PN40 (for flanges according to DIN EN 1092-1, form B) Housing: carbon steel 1.0570 or 1.0619 Safety position: spring closes Drive: piston ø80mm Springs: Standard springs Sliding washer, movable: stainless steel, SFC
8040/050VB0001M--S

Ident number 4078185 Customs fee number. 8481 8079 Type 8040: GS shut-off valve (long design) Nominal size: DN 50 (Kvs 45; Cv 52) Function: GS shut-off valve, long design (type 8040) Design: GS1 wafer type PN10-PN40 (for flanges according to DIN EN 1092-1, form B) Housing: carbon steel 1.0570 or 1.0619 Safety position: spring closes Drive: piston ø80mm Springs: Standard springs Sliding washer, movable: stainless steel, SFC

Type 4040: ball sector valve Nominal size: DN 50 (Kvs 94; Cv 109) Item: valve Design: KS2 intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: stellite; Ball sector: stainless steel, hard chrome-plated and lapped, hard chrome-plated retaining ring Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, media temperature: -15 ° C to + 200 ° C Drive: Pneumatic swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single-acting, spring closes
4040/050v31c3t1

Type 4040: ball sector valve Nominal size: DN 50 (Kvs 94; Cv 109) Item: valve Design: KS2 intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: stellite; Ball sector: stainless steel, hard chrome-plated and lapped, hard chrome-plated retaining ring Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, media temperature: -15 ° C to + 200 ° C Drive: Pneumatic swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single-acting, spring closes

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Phoenix Contact
Phoenix Contact
Stahlwille
Stahlwille
Gardner Denver
Gardner Denver
Emerson - Asco Series
Emerson - Asco Series
Bds Maschinen
Bds Maschinen