"Escogear" markasına ait modeller;
Type: FST 110 in accordance with datasheet B 410 Coupling: Normaltorque : 16,000 Nm Peaktorque : 32,000 Nm Max. allow. angular misalignment : up to 2 x 0.75° Coupling hubbore motorside : D = 100 mm with 1 keyway acc. to DIN 6885/1 gearside : D = 75 mm with 1 keyway acc. to DIN 6885/1 Hub length : 90 mm Distance between shaft ends : 5 mm Overall length : 185 mm Required grease amount : 0.36 dm3 Weight : approx. 31 kg net each
Type: Fst 110

Escogear
Type: FST 110 in accordance with datasheet B 410 Coupling: Normaltorque : 16,000 Nm Peaktorque : 32,000 Nm Max. allow. angular misalignment : up to 2 x 0.75° Coupling hubbore motorside : D = 100 mm with 1 keyway acc. to DIN 6885/1 gearside : D = 75 mm with 1 keyway acc. to DIN 6885/1 Hub length : 90 mm Distance between shaft ends : 5 mm Overall length : 185 mm Required grease amount : 0.36 dm3 Weight : approx. 31 kg net each
ESCOGEAR tooth coupling type CMM 100 according to dimension sheet A312 and sketch from 17.11.2020 Hub 1 - long, engine side: - Bore diameter Ø 70 mm H7 with 1 parallel keyway according to DIN 6885 - 1 width of the groove b = 20 P9, depth of the groove 39.9 mm +0.2 mm Optionally with a locking thread on the parallel keyway (please specify when ordering) - Hub length 117 mm Hub 2 - short, transmission side: - Bore diameter Ø 80 mm H7 with 1 parallel keyway according to DIN 6885 - 1 width of the groove b = 22 P9, depth of the groove 45.4 mm +0.2 mm Optionally with locking thread on parallel keyway (please specify when ordering) - Hub length 97 mm Socket length: C = 102 mm Socket diameter: B = Ø 190 mm Total length: A = 220 mm Shaft distance: G = 6 mm permissible nominal torque: 8,500 Nm permissible shock torque: 17,000 Nm Angular displacement: max. up to 2 x 0.75 degrees Required grease filling: 0.270 dm³ Weight: approx. 25 kg net
Typ CMM 100

Escogear
ESCOGEAR tooth coupling type CMM 100 according to dimension sheet A312 and sketch from 17.11.2020 Hub 1 - long, engine side: - Bore diameter Ø 70 mm H7 with 1 parallel keyway according to DIN 6885 - 1 width of the groove b = 20 P9, depth of the groove 39.9 mm +0.2 mm Optionally with a locking thread on the parallel keyway (please specify when ordering) - Hub length 117 mm Hub 2 - short, transmission side: - Bore diameter Ø 80 mm H7 with 1 parallel keyway according to DIN 6885 - 1 width of the groove b = 22 P9, depth of the groove 45.4 mm +0.2 mm Optionally with locking thread on parallel keyway (please specify when ordering) - Hub length 97 mm Socket length: C = 102 mm Socket diameter: B = Ø 190 mm Total length: A = 220 mm Shaft distance: G = 6 mm permissible nominal torque: 8,500 Nm permissible shock torque: 17,000 Nm Angular displacement: max. up to 2 x 0.75 degrees Required grease filling: 0.270 dm³ Weight: approx. 25 kg net
ESCOGEAR coupling, type FST 195 EM, according to datasheet B410 Bore hub 1 : pilot bored Bore hub 2 : pilot bored Min. bore diameter : Ø 90 mm Max. bore diameter : Ø 195 mm Length hub 1 : 150 mm Length hub 2 : 150 mm DBSE : 8 mm Overall length : 308 mm Maximum nominal torque : 62,000 Nm Maximum peak torque : 124,000 Nm Maximum misalignment : up to 2 x 0.75 Grad Grease quantity : 1.51 dm³ Weight : ca. 167 kg net. Extra charge for drilling, tolerance H7 with one keyway acc. DIN 6885/1
Fst 195 Em,

Escogear
ESCOGEAR coupling, type FST 195 EM, according to datasheet B410 Bore hub 1 : pilot bored Bore hub 2 : pilot bored Min. bore diameter : Ø 90 mm Max. bore diameter : Ø 195 mm Length hub 1 : 150 mm Length hub 2 : 150 mm DBSE : 8 mm Overall length : 308 mm Maximum nominal torque : 62,000 Nm Maximum peak torque : 124,000 Nm Maximum misalignment : up to 2 x 0.75 Grad Grease quantity : 1.51 dm³ Weight : ca. 167 kg net. Extra charge for drilling, tolerance H7 with one keyway acc. DIN 6885/1
ESCOGEAR Coupling Type FMM130EM according to datasheet B414 and your drawing - incl. bolts, nuts and gasket - Hub Bore 1: d = Ø 120 mm H7 with one keyway acc. to DIN 6885/1 - Hub Bore 2: d = Ø 120 mm H7 with one keyway acc. to DIN 6885/1 - Hub length1: E = 105,0 mm - Hub length 2: E´ = 170 mm - DBSE: G = 6,0 mm - Coupling length: A = 281,0 mm - Coupling normal torque 22.000 Nm Peak torque: 44.000 Nm - Max. allowable angular misalignment up to 2 x 0.75 degrees Weight: approx. 51.4 kg
Fmm130em

Escogear
ESCOGEAR Coupling Type FMM130EM according to datasheet B414 and your drawing - incl. bolts, nuts and gasket - Hub Bore 1: d = Ø 120 mm H7 with one keyway acc. to DIN 6885/1 - Hub Bore 2: d = Ø 120 mm H7 with one keyway acc. to DIN 6885/1 - Hub length1: E = 105,0 mm - Hub length 2: E´ = 170 mm - DBSE: G = 6,0 mm - Coupling length: A = 281,0 mm - Coupling normal torque 22.000 Nm Peak torque: 44.000 Nm - Max. allowable angular misalignment up to 2 x 0.75 degrees Weight: approx. 51.4 kg
ESCOGEAR coupling according to datasheet B410 Bore hub 1 : pilot bored Bore hub 2 : pilot bored Min. bore diameter : Ø 150 mm Max. bore diameter : Ø 275 mm Length hub 1 : 220 mm Length hub 2 : 220 mm DBSE : 10 mm Overall length : 450 mm Maximum nominal torque : 174,000 Nm Maximum peak torque : 348,000 Nm Maximum misalignment : up to 2 x 0.75 Grad Grease quantity : 3.29 dm³ Weight : ca. 414 kg net. Extra charge for drilling, tolerance H7 with one keyway acc. DIN 6885/1
Fst 275 Em

Escogear
ESCOGEAR coupling according to datasheet B410 Bore hub 1 : pilot bored Bore hub 2 : pilot bored Min. bore diameter : Ø 150 mm Max. bore diameter : Ø 275 mm Length hub 1 : 220 mm Length hub 2 : 220 mm DBSE : 10 mm Overall length : 450 mm Maximum nominal torque : 174,000 Nm Maximum peak torque : 348,000 Nm Maximum misalignment : up to 2 x 0.75 Grad Grease quantity : 3.29 dm³ Weight : ca. 414 kg net. Extra charge for drilling, tolerance H7 with one keyway acc. DIN 6885/1
Dpull 85 Type Coupling

Escogear
Fst 155 Type Coupling

Escogear
Unprocessed, according to data sheet B412 (standard version) Coupling data: permissible nominal torque: 16,000 Nm permissible shock torque: 32,000 Nm Permissible angular misalignment: up to 0.75° degrees Hub 1, curved teeth : undrilled Hub length 1 : E = 120 mm Hub 2, fixed part: undrilled Hub length 2 : E1 = 113mm Shaft mirror : G = 6.5 mm Coupling length : A = 239.5 mm Weight : approx. 90.3 kg net Grease filling : 0.398 dm³
Typ FFS 155 EM (Unprocessed)

Escogear
Unprocessed, according to data sheet B412 (standard version) Coupling data: permissible nominal torque: 16,000 Nm permissible shock torque: 32,000 Nm Permissible angular misalignment: up to 0.75° degrees Hub 1, curved teeth : undrilled Hub length 1 : E = 120 mm Hub 2, fixed part: undrilled Hub length 2 : E1 = 113mm Shaft mirror : G = 6.5 mm Coupling length : A = 239.5 mm Weight : approx. 90.3 kg net Grease filling : 0.398 dm³
TYP: G0-5A LOT H4
F 130 VE MAINA

Escogear
TYP: G0-5A LOT H4
Ready to install, according to data sheet B412 (standard version) Bores with tolerance H7 and each with a keyway according to DIN 6885/1 Coupling data: permissible nominal torque: 16,000 Nm permissible shock torque: 32,000 Nm Permissible angular misalignment: up to 0.75° degrees Hub 1, curved teeth : Please specify diameter when ordering Hub length 1 : E = 120 mm Hub 2, fixed part: please specify diameter when ordering Hub length 2 : E1 = 113mm Shaft mirror : G = 6.5 mm Coupling length : A = 239.5 mm Weight : approx. 90.3 kg net Grease filling : 0.398 dm³
Typ FFS 155 EM (Bore H7)

Escogear
Ready to install, according to data sheet B412 (standard version) Bores with tolerance H7 and each with a keyway according to DIN 6885/1 Coupling data: permissible nominal torque: 16,000 Nm permissible shock torque: 32,000 Nm Permissible angular misalignment: up to 0.75° degrees Hub 1, curved teeth : Please specify diameter when ordering Hub length 1 : E = 120 mm Hub 2, fixed part: please specify diameter when ordering Hub length 2 : E1 = 113mm Shaft mirror : G = 6.5 mm Coupling length : A = 239.5 mm Weight : approx. 90.3 kg net Grease filling : 0.398 dm³
Hole hub 1+2 pre-drilled Hub lengths 1+2 E = 90 mm Shaft distance DBSE G = 6 mm Coupling length A = 216 mm permissible nominal torque 22,000 Nm permissible shock torque 44,000 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 39 kg net Fat filling 0.52 dm³
Typ FST 130 EM

Escogear
Hole hub 1+2 pre-drilled Hub lengths 1+2 E = 90 mm Shaft distance DBSE G = 6 mm Coupling length A = 216 mm permissible nominal torque 22,000 Nm permissible shock torque 44,000 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 39 kg net Fat filling 0.52 dm³
Hole hub 1+2 pre-drilled Hub lengths 1+2 E = 135 mm Shaft distance DBSE G = 8 mm Coupling length A = 308 mm permissible nominal torque 62,000 Nm permissible shock torque 124,000 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 167 kg net Fat filling 1.51 dm³
Typ FST 195 EM

Escogear
Hole hub 1+2 pre-drilled Hub lengths 1+2 E = 135 mm Shaft distance DBSE G = 8 mm Coupling length A = 308 mm permissible nominal torque 62,000 Nm permissible shock torque 124,000 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 167 kg net Fat filling 1.51 dm³
gear coupling according to dimension sheet B410 Bore hub 1+2 undrilled Hub lengths 1+2 E = 43 mm Shaft distance DBSE G = 3 mm Coupling length A = 89 mm permissible nominal torque 1,300 Nm permissible shock torque 2,600 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 4.1 kg net Fat filling 0.05 dm³
FST 45 EM

Escogear
gear coupling according to dimension sheet B410 Bore hub 1+2 undrilled Hub lengths 1+2 E = 43 mm Shaft distance DBSE G = 3 mm Coupling length A = 89 mm permissible nominal torque 1,300 Nm permissible shock torque 2,600 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 4.1 kg net Fat filling 0.05 dm³
gear coupling according to dimension sheet B410 Bore hub 1+2 dmax. = 45 mm H7 with keyway according to DIN 6885/1 (Information is required in case of order) Hub lengths 1+2 E = 43 mm Shaft distance DBSE G = 3 mm Coupling length A = 89 mm permissible nominal torque 1,300 Nm permissible shock torque 2,600 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 3.5 kg net Fat filling 0.05 dm³
FST 45 EM (dmax. = 45 mm H7)

Escogear
gear coupling according to dimension sheet B410 Bore hub 1+2 dmax. = 45 mm H7 with keyway according to DIN 6885/1 (Information is required in case of order) Hub lengths 1+2 E = 43 mm Shaft distance DBSE G = 3 mm Coupling length A = 89 mm permissible nominal torque 1,300 Nm permissible shock torque 2,600 Nm permissible angular misalignment up to 2 x 0.75° degrees Weight approx. 3.5 kg net Fat filling 0.05 dm³
GEAR COUPLING
FDMM 130

Escogear
GEAR COUPLING
ESCOGEAR gear coupling type FST 280 EM according to dimension sheet B411 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 180 mm Max. drilling : Ø 280 mm Weight : approx. 591 kg net
FST 280 EM

Escogear
ESCOGEAR gear coupling type FST 280 EM according to dimension sheet B411 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 180 mm Max. drilling : Ø 280 mm Weight : approx. 591 kg net
ESCOGEAR gear coupling type FST 275 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 150 mm Max. drilling : Ø 275 mm Weight : approx. 413.6 kg net
FST 275 EM

Escogear
ESCOGEAR gear coupling type FST 275 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 150 mm Max. drilling : Ø 275 mm Weight : approx. 413.6 kg net
ESCOGEAR gear coupling type FST 240 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 120 mm Max. drilling : Ø 240 mm Weight : approx. 275 kg net
Typ FST 240 EM

Escogear
ESCOGEAR gear coupling type FST 240 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 120 mm Max. drilling : Ø 240 mm Weight : approx. 275 kg net
ESCOGEAR gear coupling type FST 215 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 100 mm Max bore : Ø 215 mm Weight : approx. 222.4 kg net
Typ FST 215 EM

Escogear
ESCOGEAR gear coupling type FST 215 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 100 mm Max bore : Ø 215 mm Weight : approx. 222.4 kg net
ESCOGEAR gear coupling type FST 175 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 80 mm Max. drilling : Ø 175 mm Weight : approx. 117.5 kg net
FST 175 EM

Escogear
ESCOGEAR gear coupling type FST 175 EM according to dimension sheet B410 Bore hub 1 : pre-drilled Bore hub 2 : pre-drilled Minimum bore : Ø 80 mm Max. drilling : Ø 175 mm Weight : approx. 117.5 kg net