"Amf" markasına ait modeller;
Vertical clamp 6803 size 3 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
90332

Amf
Vertical clamp 6803 size 3 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
Vertical clamp 6803 size 2 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
90324

Amf
Vertical clamp 6803 size 2 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
Vertical clamp 6800 size 2 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
90027

Amf
Vertical clamp 6800 size 2 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
Steel, tempered (350 + 80 HV30)
82909 Washers for clamping tools

Amf
Steel, tempered (350 + 80 HV30)
Size 20 catch screw Technical specifications: Thread: M12 Total length: 54mm
303222

Amf
Size 20 catch screw Technical specifications: Thread: M12 Total length: 54mm
Horizontal clamp 6830 size 3 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
93039

Amf
Horizontal clamp 6830 size 3 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
DIN 6340-M24
Model-04862554

Amf
DIN 6340-M24
Clamping pin size 20 for M12 catch screw Execution: Size 20 zero point clamping bolt. Stainless steel, hardened.
303149

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 zero point clamping bolt. Stainless steel, hardened.
Clamping pin size 20 for M12 catch screw Execution: Size 20 undersize pull-studs. Stainless steel, hardened.
303164

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 undersize pull-studs. Stainless steel, hardened.
Clamping pin size 20 for M12 catch screw Execution: Size 20 sword tension bolt. Stainless steel, hardened
303156

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 sword tension bolt. Stainless steel, hardened

Clamping module KP5.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 1.5 kN Holding force: 13 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 78 mm Housing / height: ø 110 / 42 mm Sensors: inductive, plug S8 Cable length: 150mm
558051

Amf
Clamping module KP5.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 1.5 kN Holding force: 13 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 78 mm Housing / height: ø 110 / 42 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP20.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneum.: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, plug S8 Cable length: 150mm
552968

Amf
Clamping module KP20.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneum.: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors, es can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN Repeat accuracy < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Order nr 552968

Amf
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors, es can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN Repeat accuracy < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
552967

Amf
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
552967

Amf
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module K20.3, pneumatic with two inductive sensors locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. The clamping module is in the closed state form-fitting and self-locking locked. The query of the locking control is done by inductive sensors, it can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN repeatability <0.005mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
552968

Amf
Clamping module K20.3, pneumatic with two inductive sensors locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. The clamping module is in the closed state form-fitting and self-locking locked. The query of the locking control is done by inductive sensors, it can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN repeatability <0.005mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Clamping bolt size 5 for catch screw M8 Execution: Zero point clamping bolt size 5. Stainless steel, hardened.
562192

Amf
Clamping bolt size 5 for catch screw M8 Execution: Zero point clamping bolt size 5. Stainless steel, hardened.
Clamping bolt size 20 for Catch screw M16
554939

Amf
Clamping bolt size 20 for Catch screw M16
Clamping bolt size 10 for Catch screw M10 Execution: Size 10 zero point clamping bolt. Stainless steel, hardened.
554936

Amf
Clamping bolt size 10 for Catch screw M10 Execution: Size 10 zero point clamping bolt. Stainless steel, hardened.
Clamping bolt size 10 for Catch screw M10 Execution: Size 10 zero point clamping bolt. Stainless steel, hardened.
554936

Amf
Clamping bolt size 10 for Catch screw M10 Execution: Size 10 zero point clamping bolt. Stainless steel, hardened.