Afriso

DIFF. PRESS GAUGES DIAL SIZE: 80 MM.

ONN.1/2" NPTF, MAG80DFI, DUAL SCALE CARK: PN100, D-74363, 2*1/4" NPT - D312 26 - REF. AFRISO 0 TO 2.5 BAR, 0 TO 36 PSI PART NO:86654312

Afriso 0-4bar

Mess- / Einstellgerät

RANGE: 0 TO 1 BAR,

CONN.: 2*1/4 NPT, WITH WALL MOUNT PLATE(38001) PART NO:88005312

DMU 01 0/25bar G1/2B

Measuring principle: piezoresistive thick-film ceramic measuring cell Measuring range: 0/25 bar (relative) Measuring accuracy: 0.5% FSO according to IEC 60770 medium range. Parts : stainless steel 304 (1.4301) / ceramic / FKM Connection : G 1/2 B according to EN 837 Supply voltage: DC 8-32 V Output signal : 4-20 mA / 2-wire Electrical connection : plug and cable socket according to ISO 4400 (DIN 43650-A)

S4650 ST 0-5000mbar 2xD8

M066030116

43410

LAG-14 ER mit Relais Application For double-walled containers with liquid in the interstitial space. To Monitoring of flammable liquids stored above ground Danger classes A I, A II, A III, B (according to the former classification VbF) and non-flammable water-polluting liquids. The LAG container can within hazardous areas of Zones I and II (e.g. cathedral shaft near petrol tanks). Approved for tanks according to EN 12285-1, EN 12285-2, DIN 6618-3, DIN 6619, DIN 6623 and DIN 6624 under atmospheric conditions. The leak detector LAG-14 may be used for underground double-walled containers since July 2003 through the reclassification of water-polluting substances Germany is only used to replace existing systems become! Description Class II leak detector (EN 13160-1/-3) with intrinsically safe Probe circuit. Consisting of signal part, Leak detection liquid container (LAG container black) and probe. Signal part with operating and alarm displays, visual/acoustic alarm, Test button and increased interference protection. The audible alarm can be activated with the the acknowledgment button can be ended. Via the potential-free relay contact In the event of an alarm, additional external signaling devices (e.g. horns) or a Additional alarm device ZAG 01 can be switched. With fail-safe mode: Acoustic alarm if the probe fails. Using a mounting frame for Suitable for panel installation, for harsh operating conditions Seal set (IP 54) available. The LAG container is a control container and at the same time expansion vessel. This is allowed for above-ground containers Maximum ratio of useful content to total amount of leak detection fluid 1:35. If the volume of the monitoring space is larger Use additional container. Technical data Temperature range: Environment: -20/+50°C Storage: -20/+60°C Supply voltage: AC 230V Signal part: Wall-mounted housing made of impact-resistant plastic (ABS) W x H x D: 100 x 188 x 65 mm Protection class: IP 30 (EN 60529) Relay output: 1 potential-free changer Contact load: AC 250V, 2A Container: Antistatic plastic, black W x H x D: 300 x 325 x 145 mm Usable content / total content: 4.5 l / 10 l Outlet: G¾ IG Protection class: IP20 (EN 60529) Conformity: CE marking according to EU Construction Products Regulation 305/2011, EU 574/2014, EN 13160-1/-3 and ÜHP ATEX approval: TPS 22 ATEX 015639 0019 x Ex II (1) G [Ex ia] Ga IIC scope of delivery Signal part, leak detection fluid container and probe

S2610 0/1000mbar 2xD8

for measuring overpressure, underpressure and differential pressure / for gaseous, dry, non-aggressive media Measuring range (mbar): -50 / +1,000 max. overpressure (bar): 3 resolution (mbar): 0.1 (<(><<)>199.9) or 1.0 (>200) accuracy (% from measured value): 1.0 +/- 1 digit (<(><<)>1,000 mbar) Scope of delivery: - measuring device with batteries - calibration protocol - protective cover with magnet

ETB LS 1/961 E1 90/110°C 1000mm

67619 ETB LS 1/961 E1 90/110°C 1000 mm Switching point: 90...110°C Switching point tolerance: +0/-6°C Sensor element: Tmax = 125°C Capillary line: 1000 mm (Cu) Contact type: single contact (normally closed) Contact load: C-2 16(2.5)A 250V~ According to Imit data sheet: 541510/B

Connection set ASS-DP for differential pressure

measurement

Mt-profil g1/2

77924

WP6